Difference between revisions of "Flood Modeller-TUFLOW Linking"
Tuflowduncan (talk | contribs) |
Tuflowduncan (talk | contribs) |
||
Line 5: | Line 5: | ||
The second approach is to connect Flood Modeller to the TUFLOW 1D engine. This 1D-1D connection allows TUFLOW 1D representations of river channels or pipe networks to drain to the 1D Flood Modeller domain, or the Flood Modeller 1D domain to drain into a TUFLOW 1D representation of the downstream network. This allows a representation of integrated urban catchment modelling <br> | The second approach is to connect Flood Modeller to the TUFLOW 1D engine. This 1D-1D connection allows TUFLOW 1D representations of river channels or pipe networks to drain to the 1D Flood Modeller domain, or the Flood Modeller 1D domain to drain into a TUFLOW 1D representation of the downstream network. This allows a representation of integrated urban catchment modelling <br> | ||
+ | |||
+ | Flood Modeller is compatible with TUFLOW Classic and TUFLOW HPC. Flood Modeller 4.5 is fully compatible with TUFLOW HPC utilising the GPU card. Flood Modeller 4.6 is required to use TUFLOW Quadtree, available in the 2020-01-AA release and later. | ||
+ | |||
+ | To assist the user get up to speed with Flood Modeller-TUFLOW modelling, a number of wiki pages have been developed to provide benchmarking, guidance and tutorials. These are shown in the following sections. | ||
=Benchmarking= | =Benchmarking= |
Revision as of 22:20, 28 May 2020
Introduction
TUFLOW can link with a range of one-dimensional modelling software, including the Flood Modeller hydraulic modelling software which is produced by Jacobs (Flood Modeller Pro). Flood Modeller is a software package which is primarily used in the UK for the modelling of river channels and their structures.
TUFLOW can be linked to Flood Modeller in a couple of ways. The first is to connect the Flood Modeller 1D representation of the open river channel to a TUFLOW 2D representation of the floodplain. This allows dynamic coupled 1D-2D modelling of the river and it's floodplain with bi-directional flow. TUFLOW 1D elements can be used on the 2D representation of the floodplain.
The second approach is to connect Flood Modeller to the TUFLOW 1D engine. This 1D-1D connection allows TUFLOW 1D representations of river channels or pipe networks to drain to the 1D Flood Modeller domain, or the Flood Modeller 1D domain to drain into a TUFLOW 1D representation of the downstream network. This allows a representation of integrated urban catchment modelling
Flood Modeller is compatible with TUFLOW Classic and TUFLOW HPC. Flood Modeller 4.5 is fully compatible with TUFLOW HPC utilising the GPU card. Flood Modeller 4.6 is required to use TUFLOW Quadtree, available in the 2020-01-AA release and later.
To assist the user get up to speed with Flood Modeller-TUFLOW modelling, a number of wiki pages have been developed to provide benchmarking, guidance and tutorials. These are shown in the following sections.