Tuflow

Green-Ampt Infiltration Parameters: Difference between revisions

Browse history interactively
← Older editNewer edit →
Content deleted Content added
VisualWikitext
Line 72:
|}
<br>
The comparison has been undertaken on a real-world whole catchment model of the Plynlimon catchment in mid-Wales. The model was run with a real rainfall event from 2015 with a temporal resolution of 30 minutes as shown in the Figure 2.<br>
<br>
 
Line 78:
 
'''Figure 2: Plynlimon Rainfall'''<br>
Within the Plynlimon catchment, the soil types were distributed within the catchment as shown in the map below although a single soil type has been selected for the comparison. Therefore, the effect seen is a consequence of changing a single soil parameter value.<br>
<br>
 
[[File:Fig3 GWY SoilMap.png|600px|Figure 3: Plynlimon Gwy Catchment Soil Types]]<br>
 
'''Figure 3: Plynlimon Gwy Catchment Soil Types'''<br>
<br>
For the purposes of this sensitivity analysis of the parameters a single soil type was used representing the general clay soil types that are present.<br>
 
Retrieved from "https://wiki.tuflow.com/Green-Ampt_Infiltration_Parameters"