TUFLOW Message 2830: Difference between revisions
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
|alt_msg=ERROR 2830 - Nesting polygon outside computational domain. |
|alt_msg=ERROR 2830 - Nesting polygon outside computational domain. |
||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=Quadtree nesting polygons can only be within or |
|message_desc=Quadtree nesting polygons can only be completely within level 1 polygon in 2d_qnl layer or 2d_code layer if level 1 polygon in 2d_qnl layer is not used.<br> |
||
Quadtree nesting polygons can only be within the model domain. |
Quadtree nesting polygons can only be within the model domain. |
||
|suggestions=Check the extent of nesting polygons is within |
|suggestions=Check the extent of nesting polygons is completely within level 1 polygon in 2d_qnl layer or 2d_code layer if level 1 polygon in 2d_qnl layer is not used. If "Model Origin and Extent" and "Orientation Angle" is set to "TGC" level 1 polygon doesn't need to be specified. In such case model domain will be used as level 1 polygon and nesting levels can be snapped to the code polygon.<br> |
||
Check the dom_check file if it needs extending. If TUFLOW doesn't produce this file, insert "Verbose == ON" in .tcf to output pre-processing dom_check file. |
Check the dom_check file if it needs extending. If TUFLOW doesn't produce this file, insert "Verbose == ON" in .tcf to output pre-processing dom_check file. |
||
|discussion_page=* [[Talk:TUFLOW Message 2830|Discuss Message 2830]] |
|discussion_page=* [[Talk:TUFLOW Message 2830|Discuss Message 2830]] |
||
Revision as of 16:40, 1 September 2020
TUFLOW Message
ERROR 2830 - Nesting polygon outside level 1 polygon.
Alternate Message
ERROR 2830 - Nesting polygon outside computational domain.
Message Type
ERROR
Description
Quadtree nesting polygons can only be completely within level 1 polygon in 2d_qnl layer or 2d_code layer if level 1 polygon in 2d_qnl layer is not used.
Quadtree nesting polygons can only be within the model domain.
Suggestions
Check the extent of nesting polygons is completely within level 1 polygon in 2d_qnl layer or 2d_code layer if level 1 polygon in 2d_qnl layer is not used. If "Model Origin and Extent" and "Orientation Angle" is set to "TGC" level 1 polygon doesn't need to be specified. In such case model domain will be used as level 1 polygon and nesting levels can be snapped to the code polygon.
Check the dom_check file if it needs extending. If TUFLOW doesn't produce this file, insert "Verbose == ON" in .tcf to output pre-processing dom_check file.
| Up |
|---|
 2xxx Messages
|