Revision as of 08:29, 22 December 2015 view source Par (talk \| contribs) Bureaucrats, Administrators 1,003 edits No edit summary ← Older edit		Revision as of 13:27, 5 November 2020 view source Pavlina Monhartova (talk \| contribs) Bureaucrats, Administrators 5,388 edits No edit summary Newer edit →
Line 3: \|alt_msg=ERROR 2041 - Too many HS tables. <br> ERROR 2041 - Too many HT tables. <br> ERROR 2041 - Too many HX tables. <br> ERROR 2041 - Too many QC tables. <br> ERROR 2041 - Too many QT tables. <br> ERROR 2041 - Too many QTA tables. <br> ERROR 2041 - Too many SH tables. <br> ERROR 2041 - Too many ST and/or RF tables. <br> ERROR 2041 - Too many SX tables. <br> ERROR 2041 - Too many VC tables. <br> ERROR 2041 - Too many VG tables. <br> ERROR 2041 - Too many VT tables. <br> ERROR 2041 - Too many WT tables. \|type=[[ERROR]] \|message_desc=Found too many input tables for a boundary type. This ~~Contact~~is ~~support~~most ~~<font~~likely ~~color="blue">support@tuflow.com</font>~~to occur if ~~this~~a ~~error~~1d_bc ~~occurs~~layer (itwhich ~~should~~has only ~~apply~~4 toattributes) ~~old~~is ~~fixed~~read ~~field~~into ~~models)~~the .tbc. A new error message has been added for the 2016 version of TUFLOW.~~<br>~~ ~~<font color="red">~~ '''Note this error could also spuriously occur for a model without fixed field inputs if the 2d_bc layer contains the incorrect number of attributes.''' The 2d_bc layer should contain 8 attributes as per the below:<br> * Type Line 14 ⟶ 13: * a * b Though rarely used, the attributes "f" through "b" can be used to apply modifiers on the boundaries (see TUFLOW Manual for information), if these are missing, Error 2041 can occur~~. This is most likely to occur if a 1d_bc layer (which has only 4 attributes) is read into the .tbc. A new error message has been added for the 2016 version of TUFLOW~~. ~~</font>~~ \|suggestions= If the 2d_bc layer has less than 8 attributes, the data should be copied into the correct 2d_bc empty layer.<br> If the 2d_bc layer is in the correct format, then please contact support <font color="blue">support@tuflow.com</font> if this error occurs and send through the .tlf file for the simulation.<br>

TUFLOW Message 2041: Difference between revisions