Difference between revisions of "TUFLOW Message 2315"

Revision as of 10:41, 1 July 2022

TUFLOW Message
ERROR 2315 - Soil ID not found in the soils parameter file(s).

Alternate Message
Note Prior to the 2016 version of TUFLOW, the following messages also could occur:
ERROR 2315 - Could not find any Surfaces in XML file. Looking for "<Surfaces>"
ERROR 2315 - Could not find any TIN surfaces in XML file. Looking for <Definition surfType="TIN">
Due to a clash in numbering these have been renumbered, please see Message 2515 for assistance with the XML file error.

Message Type
ERROR

Description
Soil ID was not found in the soils file.

Suggestions
Check the soil file has all soil IDs from the 2d_soil layer specified.

Up
2xxx Messages

@@ Line 1: / Line 1: @@
 {{TUFLOW_Message
 |tuflow_message=ERROR 2315 - Soil ID not found in the soils parameter file(s).
-|alt_msg=None<br>
+|alt_msg=
-'''Note'''- Prior to the 2016 version of TUFLOW, the following messages also could occur:<br>
+'''Note''' Prior to the 2016 version of TUFLOW, the following messages also could occur:<br>
 ERROR 2315 - Could not find any Surfaces in XML file.  Looking for "<Surfaces>"<br>
 ERROR 2315 - Could not find any TIN surfaces in XML file.  Looking for <Definition surfType="TIN"><br>
-Due to a clash in numbering these have been renumbered as [[TUFLOW_Message_2515|Message 2515]], please see [[TUFLOW_Message_2515|Message 2515]] for assistance with the XML file error.
+Due to a clash in numbering these have been renumbered, please see <u>[[TUFLOW_Message_2515|Message 2515]]</u> for assistance with the XML file error.
 |type=[[ERROR]]
-|message_desc= A land xml file contained no TIN surface.
+|message_desc= Soil ID was not found in the soils file.
-|suggestions= Check that the .xml file contains a valid TIN surface.<br>
+|suggestions= Check the soil file has all soil IDs from the 2d_soil layer specified.
-Some software will write the .xml file on a single line rather than with line breaks at the end of each tag.  This can cause the file to not be recognised in TUFLOW and the following should also be reported in the error message:<br>
-<tt>Less than 5 lines in .xml file. Make sure file is in ""Pretty Print Format"" (has line breaks).</tt><br>
-The file will need to be saved with line endings, the software used to create the file may have an option to convert the file.  The format with line endings may be referred to as '''Pretty Print''' format.  The free Microsoft editor [https://www.microsoft.com/en-au/download/details.aspx?id=7973 XML Notepad] can be used to save the file into the correct format.
 |discussion_page=* [[Talk:TUFLOW Message 2315|Discuss Message 2315]]

Difference between revisions of "TUFLOW Message 2315"

Revision as of 10:41, 1 July 2022

Navigation menu

Search