Difference between revisions of "TUFLOW Message 2036"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
|suggestions=Separate incompatible boundary types, for example ensure the both "SX" and "HX" boundaries at not both applying to the same cell. | |suggestions=Separate incompatible boundary types, for example ensure the both "SX" and "HX" boundaries at not both applying to the same cell. | ||
| − | + | ||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 11:02, 23 December 2022
TUFLOW Message
ERROR 2036 - Trying to apply a S boundary to a 2D cell already assigned a link or a H or Q boundary.
Alternate Message
NA
Message Type
ERROR
Description
Trying to apply a source flow (S) boundary to a 2D cell that has already assigned a link or a water level (H) boundary. When a water level boundary is specified on a cell, flows into and out of the cell are computed. When a S (source) or Q (flow) boundary is specified at a cell, the water level in the cell is computed. However, tt is not possible to specify both a flow and water level at a cell.
Suggestions
Separate incompatible boundary types, for example ensure the both "SX" and "HX" boundaries at not both applying to the same cell.
| Up |
|---|
 2xxx Messages
|