Tuflow

Tutorial M05: Difference between revisions

Browse history interactively
← Older editNewer edit →
Content deleted Content added
VisualWikitext
Line 39:
<li>Create a new folder called ‘pit_dbase’ in the '''Module_05\TUFLOW''' folder.
<li>Navigate to the '''Module_05\Tutorial_Data''', copy and paste the following csv files into the '''Module_05\TUFLOW\pit_dbase''' folder: <br>
*'''pit_inlet_curves.csv'''
*'''pit_inet_dbase.csv'''
<li>Open the '''pit_inlet_dbase.csv'''. The three different names are user defined inlet types matching the attribute in 1d_nwk pits file. They define the inflow into the pit depending on the above ground water depth and are derived based on the geometry of the pits. These can be unique to every model. From the pit_inlet_dbase, ‘AB’ inlet type has an area of 0.54m<sup>2</sup> and width of 3.6m and references the ‘Type AB’ in the flow column from the '''pit_inlet_curves.csv''' file.<br>
<br>
[[File:M05 pit inlet dbase_01.png]]<br>
<br>
<li>Open the '''pit_inlet_curves.csv''', it defines the depth discharge relationship for each pit inlet type.
<li>Plot the depth against flow for each pit type to view the relationship. The curves are the limiting factor for the amount of flow entering the pits. <br>
<br>
Retrieved from "https://wiki.tuflow.com/Tutorial_M05"