Tuflow

TUFLOW SWMM Tutorial M02: Difference between revisions

Browse history interactively
← Older editNewer edit →
Content deleted Content added
VisualWikitext
Line 191:
 
== Export SWMM INP File ==
The model we are building will use two SWMM INP file. '''TS01_001.gpkg''' was already created in TUFLOW SWMM Tutorial Module 1, and has been included in the base model we are using for Module 2. A second INP file will be used to define all the SWMM Pie Network inputs.
SWMM does not read '''TS02_001.gpkg''' directly as an input GIS file. SWMM requires a INP file.▼
 
▲SWMMWe doesneed notto readconvert '''TS02_001.gpkg''' directlyinto as an input GIS file.a SWMM requires a INP file.
<ol>
<li>In the QGIS Layer Panel, select '''TS02_001.gpkg''' and right click '''Links--Conduits'''. and selectSelect TUFLOW > 'SWMM - Export inp file'. This opens the dialog shown below.
<li>Select '''TS01_001TS02_001.gpkg''' as the GeoPackage Input File.
<li>Set the SWMM output filename to '''TS02_001.inp''' in the '''''TUFLOW_SWMM_Module_02/TUFLOW/model/swmm''''' folder.
<li>Select "Run", then "Close" after the processing is complete.
</ol>
Retrieved from "https://wiki.tuflow.com/TUFLOW_SWMM_Tutorial_M02"