Tuflow

TUFLOW SWMM Tutorial M02: Difference between revisions

Browse history interactively
← Older editNewer edit →
Content deleted Content added
VisualWikitext
Line 237:
 
To compete the pipe network 1D/2D linking between 1D SWMM and 2D TUFLOW, we still need to define the linkage at the outlet.
<ol>
<li>In the QGIS Layers Panel, select (left click) '''Links--Conduits'''.
<li>Navigate to the '''TUFLOW_SWMM_Module_02\TUFLOW\model\gis''' folder. ▼
<li>In the Processing Toolbox, go to TUFLOW > SWMM and select 'BC - Create channel endpoint 1D/2D connections'. This opens the dialog shown below.
<li>Save a copy of '''M02_001.gpkg''' as '''TS02_001.gpkg'''.
:*Input Conduits Layer: '''Links--Conduits'''
:*Offset Distance: 2
:*Length of BC lines: 10
:*Output Layer:
<ol>
::<li>Click the ... and select 'Save to GeoPackage'.
▲::<li>Navigate to the '''TUFLOW_SWMM_Module_02\TUFLOW\model\gisswmm''' folder and select '''TS02_001.gpkg'''. Click Save.
::<li>A dialog will open. In the Layer Name box, write '''2d_bc_SWMM_Pipe_Network_Connections_001_L'''.
::<li>Click 'OK'.
</ol>
<li>Click 'Run'.
<li>Once the tool is finished, click 'Close'.
<li>'''2d_bc_SWMM_Pipe_Network_Connections_001_L''' should appear in the Layers Panel.
</ol>
<br><font color="red">'''<< Add video >>'''</font><br>
 
'''Test model without input - the Inlet Usage Layer has an SX attribute'''
 
=== Boundary Conditions===
Retrieved from "https://wiki.tuflow.com/TUFLOW_SWMM_Tutorial_M02"