TUFLOW SWMM Tutorial M02: Difference between revisions
Content deleted Content added
Chris Huxley (talk | contribs) |
Chris Huxley (talk | contribs) |
||
Line 173:
<ol>
<li>In the QGIS Layers Panel, select (left click) '''Links--Conduits''' and toggle on editing.
<li>Select the most downstream object in '''Links--Conduits'''.
<li>In the Processing Toolbox, go to TUFLOW > SWMM and select 'BC - Create channel endpoint 1D/2D connections'. This opens the dialog shown below. ▼
▲<li>In the Processing Toolbox, go to '''TUFLOW > SWMM''' and select '<nowiki/>'''BC - Create channel endpoint 1D/2D connections'''<nowiki/>'. This opens the dialog shown below.
:*Tick: Select features only
:*Input Conduits Layer: '''Links--Conduits'''
:*Offset Distance: 2
:*Length of BC lines: 10
:*Tick: Set 2D cell elevation to 1D culevrt invert at 1D/2D connection cells if needed.
:*Output Layer:
<ol>
::<li>Click the ... and select 'Save to GeoPackage'.
::<li>Navigate to the '''TUFLOW\model\swmm''' folder and select '''
::<li>A dialog will open. In the Layer Name box, write '''2d_bc_SWMM_Pipe_Network_Connections_001_L'''.
::<li>Click 'OK'.
</ol><li>Click 'Run'.
<li>Once the tool is finished, click 'Close'.
<li>'''2d_bc_SWMM_Pipe_Network_Connections_001_L''' should appear in the Layers Panel.
| |||