TUFLOW SWMM Tutorial M03: Difference between revisions

:*Open '''TS02_001.tbc,''' and save the file as '''TS03_001.tbc''' in the '''TUFLOW\model''' folder.

:*Open '''TS02_001.tscf,''' and save the file as '''TS03_001.tscf''' in the '''TUFLOW\model''' folder.

'''<<video>>'''

</ol>

===TUFLOW Control File (TCF)===

<ol>

<li> Comment out the Map Cuttoff Depth command using a <font color="green"><tt>!</tt></font>. It is only necessary for 2D direct rainfall (rain on grid) modelling (SWMM Tutorial 2).<br>

<font color="green"><tt>!Map Cutoff Depth == 0.05</tt></font>

'''<<video>>'''

</ol>

===TUFLOW Boundary Control File (TBC)===

<ol>

<li> Add the following command:

<font color="blue"><tt> Read GIS SA </tt></font> <font color="red"><tt> == </tt></font> <font color="black"><tt> 2d_sa_TS03_001_R  </tt></font> <font color="green"><tt> ! Reads in 2D source area </tt></font><br>

'''<<video>>'''

</ol>

===TUFLOW SWMM Control File (TSCF)===

<ol>

<li> Add the following command:<br>

<font color="blue"><tt> Read SWMM </tt></font> <font color="red"><tt> == </tt></font> <font color="black"><tt> swmm\sw03_001.inp </tt></font> <font color="green"><tt> ! 1D SWMM Urban Hydrology </tt></font><br>

'''<<video>>'''

</ol>

 

=Running the Simulation=