Revision as of 10:40, 23 December 2022 view source Melissa.Moghanloo (talk \| contribs) Bureaucrats, Administrators 2,918 edits No edit summary ← Older edit		Revision as of 14:47, 18 July 2024 view source Emilie Nielsen (talk \| contribs) Administrators 6,125 edits No edit summary Newer edit →
Line 3: \|alt_msg=NA \|type=[[CHECK]] \|message_desc=When applying the Engelhund loss approach for manholes (see Section 4.5.2 of the 2010 TUFLOW manual), if an incoming culvert enters above the obvert of the highest outlet, the culvert is not included in the manhole loss calculations. If there is only 1 incoming pipe with the invert above the obvert of the outlet culvert, the incoming culvert is ignored and with no inlet culvert to the node a manhole is not possible. See also point 48(b) in the <u>[~~http~~https://www.tuflow.com/Download/TUFLOW/Releases/2012-05/Doc/TUFLOW%20Release%20Notes.2011-09%20and%202012-05.pdf release notes]</u>. \|suggestions=Review the inverts on the culverts. A point object in a "1d_mh" layer can be used to set the loss approach at each manhole.

TUFLOW Message 1402: Difference between revisions