TUFLOW CATCH Tutorial M01 Results QGIS

Page Under Construction

Introduction

Review the TUFLOW CATCH timeseries outputs:

• Mass balance files
  • Surface water: Cumulative surface water flow and associated pollutant masses leaving the TUFLOW HPC model and entering the receiving polygon.
  • Groundwater: Cumulative groundwater water flow and associated pollutant masses leaving the TUFLOW HPC model and entering the receiving polygon.
  • Total: The combined data from the above surface water and groundwater mass balance outputs.
• Receiving polygon inflows and concentrations

Additionally, review the TUFLOW HPC mesh results (.xmdf file) using the TUFLOW Viewer.

TUFLOW CATCH Timeseries Outputs

Review the time series data for the receiving polygon:

1. In Windows File Explorer, navigate to the Modelling\TUFLOWCatch\bc_dbase folder and open TC01_001_catchment_hydraulic_receiving.csv.
2. This file contains information for flow, salinity, temperature, dissolved oxygen, alive/dead e coli and clay at in interval of 5mins. This interval is defined via the what command?? == ?? command in the .tcc.
3. Salinity and dissolved oxygen are both constant, so the outputs should be constant throughout the entire simulation.
   
   File:Graph of constant pollutants over time
   
   

TUFLOW HPC Mesh Results

Up
Back to TUFLOW CATCH Tutorial 1