Revision as of 00:37, 11 June 2025 view source RussellGardner (talk \| contribs) Bureaucrats, Administrators 438 edits →TUFLOW Boundary Condition Control File ← Older edit		Revision as of 00:46, 11 June 2025 view source RussellGardner (talk \| contribs) Bureaucrats, Administrators 438 edits →TUFLOW Boundary Condition Control File Newer edit →
Line 111: <li> Open '''M02_5m_001.tbc''' and save a copy as '''FMT_M01_001.tbc'''. <li> Remove the boundary linking to the TUFLOW inflows by:<br> <br><li>Put an exclamation mark before the line reading:<br>▼ <br><u>'''QGIS - SHP'''</u><br> ▲<br>Put an exclamation mark before the line reading:<br> :<br><font color="blue"><tt>Read GIS BC</tt></font> <font color="red"><tt>== </tt></font> gis\2d_bc_M01_002_L.SHP<br> <br><u>'''QGIS - GPKG'''</u><br>▼ ~~<br><li> Update the 1D/2D boundary links at the ESTRY culverts with the new layer:</li>~~ :<br><font color="blue"><tt>Read GIS BC</tt></font> <font color="red"><tt>== </tt></font> ~~gis\2d_bc_M04_culverts_001_L.shp <font color="green"><tt>! This command reads in SX boundaries linking the 1D ESTRY culverts to the 2D domain</tt></font>~~2d_bc_M01_002_L<br> ~~<br><li> Add reference to the 1D/2D boundary links that connect Flood Modeller to the 2D floodplain:</li>~~ :<br><font color="blue"><tt>Read GIS BC </tt></font> <font color="red"><tt>== </tt></font> gis\2d_bc_FMT_M01_HX_001_p.shp \| gis\2d_bc_FMT_M01_HX_001_L.shp <font color="green"><tt>! This command reads in HX boundaries linking the 1D Flood Modeller watercourse to the 2D domain</tt></font><br>▼ ▲<br><u>'''QGIS - GPKG'''</u><br> ~~:<br>Put an exclamation mark before the line reading:<br>~~ ~~:<br><font color="blue"><tt>Read GIS BC</tt></font> <font color="red"><tt>== </tt></font> 2d_bc_M01_002_L<br>~~ <br><li> Update the 1D/2D boundary links at the ESTRY culverts with the new layer:~~</li>~~ <br><u>'''QGIS - SHP'''</u><br> :<br><font color="blue"><tt>Read GIS BC</tt></font> <font color="red"><tt>== </tt></font> gis\2d_bc_M04_culverts_001_L.shp <font color="green"><tt>! This command reads in SX boundaries linking the 1D ESTRY culverts to the 2D domain</tt></font><br> <br><u>'''QGIS - GPKG'''</u><br> :<br><font color="blue"><tt>Read GIS BC</tt></font> <font color="red"><tt>== </tt></font> 2d_bc_M04_culverts_001_L <font color="green"><tt>! This command reads in SX boundaries linking the 1D ESTRY culverts to the 2D domain</tt></font><br> <br><li> Add reference to the 1D/2D boundary links that connect Flood Modeller to the 2D floodplain:~~</li>~~ <br><u>'''QGIS - SHP'''</u><br> ▲:<br><font color="blue"><tt>Read GIS BC </tt></font> <font color="red"><tt>== </tt></font> gis\2d_bc_FMT_M01_HX_001_p.shp \| gis\2d_bc_FMT_M01_HX_001_L.shp <font color="green"><tt>! This command reads in HX boundaries linking the 1D Flood Modeller watercourse to the 2D domain</tt></font><br> <br><u>'''QGIS - GPKG'''</u><br> :<br><font color="blue"><tt>Read GIS BC </tt></font> <font color="red"><tt>== </tt></font> 2d_bc_FMT_M01_HX_001_P \| 2d_bc_FMT_M01_HX_001_L <font color="green"><tt>! This command reads in HX boundaries linking the 1D Flood Modeller watercourse to the 2D domain</tt></font><br> <br><li> Save the file. The boundary control file is now ready to be used. </ol>

Flood Modeller Tutorial Module01 Provisional: Difference between revisions