Tuflow

Flood Modeller Tutorial Module01 Provisional: Difference between revisions

Browse history interactively
← Older editNewer edit →
Content deleted Content added
VisualWikitext
Line 112:
<ol>
<li> Open '''M02_5m_001.tbc''' and save a copy as '''FMT_M01_001.tbc'''.
<li> Remove the boundary linking to the TUFLOW inflows by putting an exclamation mark before the line reading:<br><u>'''QGIS - SHP'''</u><br><font color="blue"><tt>Read GIS BC</tt></font> <font color="red"><tt>== </tt></font> gis\2d_bc_M01_002_L.SHPshp<br><u>'''QGIS - GPKG'''</u><br><font color="blue"><tt>Read GIS BC</tt></font> <font color="red"><tt>== </tt></font> 2d_bc_M01_002_L<li> Update the 1D/2D boundary links at the ESTRY culverts with the new layer:
 
<br><u>'''QGIS - SHP'''</u><br><font color="blue"><tt>Read GIS BC</tt></font> <font color="red"><tt>== </tt></font> gis\2d_bc_M04_culverts_001_L.shp <font color="green"><tt>! This command reads in SX boundaries linking the 1D ESTRY culverts to the 2D domain</tt></font><br><u>'''QGIS - GPKG'''</u><br><font color="blue"><tt>Read GIS BC</tt></font> <font color="red"><tt>== </tt></font> 2d_bc_M04_culverts_001_L <font color="green"><tt>! This command reads in SX boundaries linking the 1D ESTRY culverts to the 2D domain</tt></font><li> Add reference to the 1D/2D boundary links that connect Flood Modeller to the 2D floodplain:
<br><u>'''QGIS - SHP'''</u><br>
 
:<br><u>'''QGIS - SHP'''</u><br><font color="blue"><tt>Read GIS BC </tt></font> <font color="red"><tt>== </tt></font> gis\2d_bc_M04_culverts_001_L2d_bc_FMT_M01_HX_001_p.shp | gis\2d_bc_FMT_M01_HX_001_L.shp <font color="green"><tt>! This command reads in SXHX boundaries linking the 1D ESTRYFlood culvertsModeller watercourse to the 2D domain</tt></font><br><u>'''QGIS - GPKG'''</u><br><font color="blue"><tt>Read GIS BC </tt></font> <font color="red"><tt>== </tt></font> 2d_bc_FMT_M01_HX_001_P | 2d_bc_FMT_M01_HX_001_L <font color="green"><tt>! This command reads in HX boundaries linking the 1D Flood Modeller watercourse to the 2D domain</tt></font><li> Save the file. The boundary control file is now ready to be used.
 
<br><u>'''QGIS - GPKG'''</u><br>
 
:<br><font color="blue"><tt>Read GIS BC</tt></font> <font color="red"><tt>== </tt></font> 2d_bc_M04_culverts_001_L <font color="green"><tt>! This command reads in SX boundaries linking the 1D ESTRY culverts to the 2D domain</tt></font><br>
 
<br><li> Add reference to the 1D/2D boundary links that connect Flood Modeller to the 2D floodplain:
 
<br><u>'''QGIS - SHP'''</u><br>
 
:<br><font color="blue"><tt>Read GIS BC </tt></font> <font color="red"><tt>== </tt></font> gis\2d_bc_FMT_M01_HX_001_p.shp | gis\2d_bc_FMT_M01_HX_001_L.shp <font color="green"><tt>! This command reads in HX boundaries linking the 1D Flood Modeller watercourse to the 2D domain</tt></font><br>
 
<br><u>'''QGIS - GPKG'''</u><br>
 
:<br><font color="blue"><tt>Read GIS BC </tt></font> <font color="red"><tt>== </tt></font> 2d_bc_FMT_M01_HX_001_P | 2d_bc_FMT_M01_HX_001_L <font color="green"><tt>! This command reads in HX boundaries linking the 1D Flood Modeller watercourse to the 2D domain</tt></font><br>
 
<br><li> Save the file. The boundary control file is now ready to be used.
 
</ol>
Retrieved from "https://wiki.tuflow.com/Flood_Modeller_Tutorial_Module01_Provisional"