Difference between revisions of "TUFLOW Message 2575"
| Line 8: | Line 8: | ||
GeoTIFF may be in tile format, which is currently not supported. <br> | GeoTIFF may be in tile format, which is currently not supported. <br> | ||
| − | The TIF format supports storing data in both a tiled and strip structure. | + | The TIF format supports storing data in both a tiled and strip structure. TUFLOW releases only support the strip structure as this is the most common and the default out of QGIS/GDAL.<br> |
[[File: tif_strip_tile_structure.PNG]]<br> | [[File: tif_strip_tile_structure.PNG]]<br> | ||
To convert a tiled GeoTIFF to a format that TUFLOW 2023-03 can read please use one of the steps below. Please ensure you don't select 'Cloud Optimised GeoTIFF' as an output as this format uses a tiled format. | To convert a tiled GeoTIFF to a format that TUFLOW 2023-03 can read please use one of the steps below. Please ensure you don't select 'Cloud Optimised GeoTIFF' as an output as this format uses a tiled format. | ||
Latest revision as of 17:23, 3 September 2025
TUFLOW Message
ERROR 2575 - file is not a GeoTIFF - <>.
Alternate Message
ERROR 2575 - extracting projection from "<>".
Message Type
ERROR
Description
Error occurred while reading the specified tif file.
Suggestions
Check the file is in GeoTIFF format and/or the projection is specified.
GeoTIFF may be in tile format, which is currently not supported.
The TIF format supports storing data in both a tiled and strip structure. TUFLOW releases only support the strip structure as this is the most common and the default out of QGIS/GDAL.
To convert a tiled GeoTIFF to a format that TUFLOW 2023-03 can read please use one of the steps below. Please ensure you don't select 'Cloud Optimised GeoTIFF' as an output as this format uses a tiled format.
- Open the GeoTIFF in QGIS and export it into a new GeoTIFF (QGIS by default will use a strip structure)
- Use the raster conversion tool in QGIS (via the menu "Raster >> Conversion >> Translate") - the default GeoTIFF format will be use the strip structure
- Use "raster_translate" GDAL tool either through the processing toolbox in QGIS or by following the instructions on the following wiki page to use GDAL directly:
| Up |
|---|
 2xxx Messages
|