Flood Modeller Tutorial Module01 Provisional: Difference between revisions
Content deleted Content added
Line 13:
For this module, the complete Flood Modeller 1D model network has been provided, to allow for progressing through the module in a relatively short period of time.
==Linking Flood Modeller to TUFLOW==
It is assumed from the outset of this module that Flood Modeller has already been linked to the desired version of TUFLOW. There are four methods by which Flood Modeller and TUFLOW can be linked, all of which are described on this <u>[[Running_linked_Flood_Modeller_-_TUFLOW_Models | page]]</u>.
Using the Flood Modeller interface to set the location of the TUFLOW engine files for the TUFLOW build you want to use, is the simplest approach to linking Flood Modeller and TUFLOW and does not duplicate files. This method is recommended if it is expected that the same versions of Flood Modeller and TUFLOW will be used consistently when running linked models.
1) Open the Flood Modeller software and in the 'Home' tab select the 'General' option. <br>
[[file:FM Home Tab.png|500px]] <br>
2) Select the 'Project Settings' sub-menu and within the TUFLOW Engine File Location choose to browse to the version of TUFLOW that you would like to link Flood Modeller to. Choose 'Open' and then 'OK'. It is recommended that the option 'Show Solver Window when Running Simulations' be switched on as well. <br>
[[file:FM TUFLOW Linking 26092025.png|500px]] <br>
3) Save the changes that you have made to the setup. This will update the settings file (formed.ini).
4) Restart Flood Modeller to effect the revised setting.
4) The linked model can then be run by opening the .ief file within the Flood Modeller Interface and clicking Run. <br>
=Existing Model Data=
| |||