Revision as of 15:42, 18 December 2014 view source Mitch3007 (talk \| contribs) Bureaucrats, Administrators 1,585 edits →Use of Scenarios to Modify 2d Grid Resolution ← Older edit		Revision as of 15:42, 18 December 2014 view source Mitch3007 (talk \| contribs) Bureaucrats, Administrators 1,585 edits →Use of Scenarios to Modify 2d Grid Resolution Newer edit →
Line 54: To run the model with varying cell sizes from a single TCF, the use of scenarios was implemented. The scenario here, either '10ft' or '15ft' can be entered in the batch file using the -s command. If the -s command is not used, the model will assume a default model scenario of 10ft as specified by the line <font color="blue"><tt>Model Scenario </tt></font> <font color="red"><tt>==</tt></font> <tt> 10ft </tt> within the TCF. ~~<br>~~ ~~The~~Here, the cell size, 2D timestep and log output frequency have been set as scenario dependent through an external read file called from the TCF: <font color="blue"><tt>Read File </tt></font> <font color="red"><tt>==</tt></font> <tt> FMA_T1_CellSize_Commands_001.trd </tt><br> <br>

FMA Challenge 1 (1D-2D linked): Difference between revisions