FMA Challenge 1 (1D-2D linked): Difference between revisions
Content deleted Content added
Line 53:
To test the effect of different resolutions, simulations were made using grid resolutions of 5, 10, 15, 20 and 40 ft (Noted that only the 10 and 15ft are presented in this example).
To run the model with varying cell sizes from a single TCF, the use of scenarios was implemented with either '10ft' or '15ft' entered in the batch file using the -s command. Importantly, if the -s batch command is not used, the model will assume a default model scenario of 10ft as specified by the line <font color="blue"><tt>Model Scenario </tt></font> <font color="red"><tt>==</tt></font> <tt> 10ft </tt> within the TCF.
Within this example the 2D cell size, 2D timestep and log output frequency have been set as scenario dependent through an external read file called from the TCF: <font color="blue"><tt>Read File </tt></font> <font color="red"><tt>==</tt></font> <tt> FMA_T1_CellSize_Commands_001.trd </tt><br>
| |||