FMA Challenge 1 (1D-2D linked): Difference between revisions

To run the model with varying cell sizes from a single TCF, the use of scenarios was implemented with either '10ft' or '15ft' entered in the batch file using the -s command. Importantly, if the -s switch is not used, the model will assume a default model scenario of 10ft as specified by the line <font color="blue"><tt>Model Scenario </tt></font> <font color="red"><tt>==</tt></font> <tt> 10ft </tt> within the TCF.

 

 

When the model is initialised, the scenario determines the 2D_CELL_SIZE, 2D_Timestep and LogInt variables. The variables are set using the 'Set Variable' command in the trf.