Revision as of 14:46, 7 January 2015 view source Mitch3007 (talk \| contribs) Bureaucrats, Administrators 1,585 edits →Introduction ← Older edit		Revision as of 14:47, 7 January 2015 view source Mitch3007 (talk \| contribs) Bureaucrats, Administrators 1,585 edits →Computational Domain Assembly Newer edit →
Line 20: =Model Setup= This section provides an overview and discussion of the model domain setup.<br> All files required to re-run the model can be found at '''FMA_Challenge_Models/FMA_Scenario2/'''. It is at your discretion which GIS package, text editor and method of model simulation to use (batch mode or within the text editor). ~~==Computational Domain Assembly==~~ The TUFLOW model directly reads the provided ESRII ASCII DEM raster format, to set the extent of the computational domain and interpolate elevations at the 2D cell centers, mid-sides and corners. The boundary locations were digitized in GIS layers. The provided GIS land use layer was directly read for assigning roughness values. Fixed grid models of different resolutions and a flexible mesh model were set up. The fixed grid domains were orientated north-south ==Cross Section Spacing, Grid Size, and Mesh Element Size==

FMA Challenge 2: Difference between revisions