Revision as of 03:43, 10 February 2016 view source Rohan.king (talk \| contribs) 1,264 edits m →Typical check files used ← Older edit		Revision as of 03:47, 10 February 2016 view source Rohan.king (talk \| contribs) 1,264 edits m →Typical check files used Newer edit →
Line 25: ! style="background-color:#005581; font-weight:bold; color:white;"\| Filename prefix / suffix ! style="background-color:#005581; font-weight:bold; color:white;" width=75%\| Brief Description \|- ~~\| [[Check_Files_1d_bc_tables \| _1d_bc_tables_check.csv]]\|\| Contains the tabular boundary data for the 1D section of the model.~~ \|- ~~\| [[ Check_Files_1d_pit_inlet_tables \|_pit_inlet_tables_check.csv]]\|\| Similar to the _1d_bc_tables_check.csv. It contains tabular data as read from the pit inlet database.~~ \|- \| [[Check_Files_1d_ta_tables \| 1d_ta_tables_check.csv]]\|\| Tabular data as read from tables via the 1d_tab layers for cross-section, storage and other data. Provides full traceability to original data source and additional information such as hydraulic properties determined from a cross-section profile. Flood Modeller XZ processed, and MIKE 11 processed cross-section data included. Refer also to the _xsl_check layer. \|- \| [[Check_Files_1d_bc_check \| _bc_check.mif<br>_bc_check_P.shp]]\|\| GIS .mif/.mid or .shp files of the final 1D boundary conditions (BC). If no boundary conditions were specified, empty .mif/.mid or .shp files are written that can be used to set up a new layer. \|- \| [[Check_Files_1d_hydroprop \| _hydroprop_check.mif<br>_hydroprop_check_L.shp]]\|\| Contains the hydraulic properties at the top of the hydraulic properties tables as attributes of the 1D channels. Other information such as the primary Manning’s n is also provided. Very useful for carrying out quality control checks on the 1D channels. Line 39 ⟶ 31: \|- \| [[Check_Files_1d_IWL \| _iwl_check.mif<br>_iwl_check_P.shp]]\|\| GIS .mif/.mid or .shp files of the initial water levels at the 1D model nodes. \|- ~~\| [[Check_Files_1d_mhc \| _mhc_check.mif<br>_mhc_check_P.shp]]\|\| GIS layer of manholes including any automatically created manholes.~~ \|- \| [[Check_Files_1d_nwk_C \| _nwk_C_check.mif<br>_nwk_C_check_L.shp]]\|\| GIS .mif/.mid or .shp files of the final 1D model network. This check layer contains the channels of the 1D domain only. The _nwk_N_check layer contains the nodes.<br>

1D Open Channels: Difference between revisions