TUFLOW Message 3039
Revision as of 15:21, 13 July 2022 by Melissa.Moghanloo (talk | contribs)
TUFLOW Message
ERROR 3039: Form loss factors must be >= 0.
Alternate Message
None
Message Type
ERROR
Description
The value of specified Form Loss Coefficient must be greater than 0.0.
Suggestions
The Form Loss Coefficient (FLC) can be used to apply an additional energy loss at the 2D cell side (in the same manner as for 2D flow constrictions).
| Up |
|---|
 3xxx Messages
|