TUFLOW Message 2231
Revision as of 16:30, 6 July 2022 by Melissa.Moghanloo (talk | contribs)
TUFLOW Message
CHECK 2231 - No ZP points snapped to HX line. HX line not used to modify Zpts.
Alternate Message
NA
Message Type
CHECK
Description
When using Read GIS Z HX Line points with type ZP are snapped along the HX line to set the elevation of the 2D cells along 1D/2D connection. For the ZP points the 2d_bc “f” attribute is used to set the elevation and the “d” attribute is used to adjust the elevation. This message informs the user that a HX line has been found without any attached ZP points. This line is not modifying any cell elevations.
Suggestions
Check HX line to see if a breakline is intended.
| Up |
|---|
 2xxx Messages
|