TUFLOW Message 1036
Revision as of 13:53, 12 February 2024 by Pavlina Monhartova (talk | contribs)
TUFLOW Message
WARNING 1036 - Maybe problems with interpolating n values for channel ",a,". Interpolating n using channel n and downstream XSL n. Check n values. U/S X-Sect n = 'a'; D/S X-Sect n = 'b'; n interpolated = 'c'.
Alternate Message
NA
Message Type
WARNING
Description
Channel's n was interpolated using channel n and downstream XSL n.
Suggestions
Check final n values if they are correct, specifically if some n values were not specified as this can result in non-standard n values.
| Up |
|---|
 1xxx Messages
|