Tutorial M10 004 Check Files QGIS

Introduction

QGIS is used to import check files and review the dambreak hydrograph.

Method

This tutorial introduces:

• _sac_check_R

Review the check files:

1. Open the following files from the Module_10\TUFLOW\check folder:

   • M10_5m_004_sac_check_R.shp

2. Use the 'Apply TUFLOW Styles to Open Layers' from the TUFLOW toolbar.
3. The sac_check is related to the 2d_sa boundary layer and, by default, shows the lowest cell selected by the 2d_sa polygon and is where the dambreak hydrograph is applied.
   
   

Conclusion

• The sac_check revealed the location of the applied hydrograph.

Up
Back to Module 10 Main Page