Check Files 2d sac

This file is only created if a source area (2d_sa, 2d_sa_rf, 2d_sa_po or 2d_sa_tr) GIS layer has been specified in the model (Read GIS SA [ <option> ] == ). This file contains information on the lowest, stream or pit cells for each SA boundary region.

Attributes of _sac_check

Attribute Name	Attribute Description
BC_Description	This contains a description of the type of cell (lowest, stream or pit), the boundary name and the number of cells this applies to. An example is: Lowest 2D cell for Inflow "SB1" (ZC = 44.06; No. Cells = 1546) This indicates that the cell is "lowest", the source boundary name is "SB1" and the minimum cell elevation is 44.06 and a total number of cells within the SA region is 1546. Refer to the TUFLOW Manual for more information on the different source area boundaries.
BC_Name	The boundary name, e.g. "SB1".
BC_Group	If using boundary groups, this is the boundary group. If boundary groups are not used, this attribute will be blank.

Up
TUFLOW Check Files