Check Files 2d to 2d bc

This GIS check file layer contains more information on the 2D/2D boundary links. Boundary cells from both domains are output as region objects. Please refer to the TUFLOW Manual for more information on the 2D 2D linking method.
This layer is output only if a model uses multiple 2D domains.

Attributes of 2d_to_2d_check

Attribute Name	Attribute Description
ZC	The ZC (cell centre) elevation of the 2D/2D boundary cell.
Z_2D2D_Line	The bed elevation based on the hidden 1D nodes.
Primary_Point	A series of 1D nodes or control points are used along the line to set the water level in both domains. The node ID of the primary node along the 2D 2D link.
Secondary_Point	The node ID of the secondary node along the 2D 2D link.
Weight_to_P	The weighting to the primary node along the 2D 2D link.
Weight_to_S	The weighting to the secondary node along the 2D 2D link.
Flags	The boundary flags that have been specified (if any).
Domain_Name	The name of the 2D domain the connection applies to.
fxob	The oblique boundary x factor.
fyob	The oblique boundary y factor.
ZC_max	The maximum ZC along the link.
Use_ZC_Max	Whether the max ZC elevation is being used to set the ZC for the cell.

In the image below, the check file has been styled on the Primary_Point attribute.

Up
TUFLOW Check Files