New pages

Jump to navigation Jump to search
New pages
Hide registered users | Show bots | Hide redirects

20 July 2026

  • 10:5710:57, 20 July 2026 TUFLOW Message 4026 (hist | edit) [892 bytes] Emilie Nielsen (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 4026 - "If Scenario" / "If Event" not yet currently supported in TUFLOW-AD control file (.adcf). |alt_msg=NA |type=ERROR |message_desc="If Scenario" and/or "If Event" commands are not supported in .adcf (TUFLOW AD control file). |suggestions=Use "If Scenario" and/or "If Event" in the .tcf file to specify different .adcf files for each scenario/event. For example, <tt><font color=blue>If Scenario</font><font color=red> == </fo...")
  • 10:5210:52, 20 July 2026 TUFLOW Message 4034 (hist | edit) [183 bytes] Emilie Nielsen (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 4034 - Number of 1d node missmatch. |alt_msg=NA |type=ERROR |message_desc= |suggestions= |uplink=4xxx Messages }}")
  • 10:3710:37, 20 July 2026 TUFLOW Message 4024 (hist | edit) [919 bytes] Emilie Nielsen (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 4024 - "If Scenario" / "If Event" syntax not yet currently supported in .tbc file when using TUFLOW-AD. |alt_msg=NA |type=ERROR |message_desc="If Scenario" and/or "If Event" commands are not supported in .tbc file when using TUFLOW AD (Advection Dispersion). |suggestions=Use "If Scenario" and/or "If Event" in the .tcf file to specify different .tbc files for each scenario/event. For example, <tt><font color=blue>If Scenario</...")

10 July 2026

  • 09:2209:22, 10 July 2026 DRAFT: Create a 'cut down' model (hist | edit) [6,245 bytes] Teegan.Burke (talk | contribs) (Created page with "=Why ‘cut down’ a model?= Cutting down a model refers to extracting a subarea of a larger model and configuring it to satisfactorily reproduce the results of the larger model. This is commonly desired when a regional model is available (often through a government agency or authority) and it is to be used for a localised development impact assessment. The modeller may wish to cut down a model to make it fit for purpose or to facilitate further model refinement for an...")

27 June 2026

  • 00:3500:35, 27 June 2026 TUFLOW Message 2663 (hist | edit) [503 bytes] Ellis Symons (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2663 - Disabling temporal output due to GLO output. |alt_msg=N/A |type=ERROR |message_desc=Gauge level outputs (GLO) replace the conventional approach of using a "Start Map Output" time and "Map Output Interval" (i.e. it is not possible to get map outputs using a gauge location and also at a regular intervals). |suggestions=Remove the "Read GIS GLO" command if map outputs at a regular interval is desired. Or, remove any "Map Out...")

25 June 2026

23 June 2026

  • 13:3413:34, 23 June 2026 Tutorial M11 002 Results QGIS TUFLOW Viewer V2 (hist | edit) [2,174 bytes] Anne.Kolega (talk | contribs) (Created page with "=Introduction= QGIS is used to view the water level in the 1D network, moving between the 1D and 2D and in the 2D floodplain using TUFLOW Viewer V2. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> =Method= Inspect water level and velocity outputs: <ol> <li>Open the Map Outputs results, either: *Within the QGIS Browser Panel drag the following layers into the QGIS workspace, or ::* '''Module_11\TUFLOW\resu...")
  • 13:3313:33, 23 June 2026 Tutorial M11 001 Results QGIS TUFLOW Viewer V2 (hist | edit) [2,928 bytes] Anne.Kolega (talk | contribs) (Created page with "=Introduction= QGIS and TUFLOW Viewer V2 is used to view the water level in the 1D network, moving between the 1D and 2D and in the 2D floodplain. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> =Method= Inspect water level and velocity outputs: <ol> <li>Open the Map Outputs and Time Series results, either: *Within the QGIS Browser Panel drag the following layers into the QGIS workspace, or ::* '''Module_...")
  • 13:3213:32, 23 June 2026 Tutorial M10 005 Results QGIS TUFLOW Viewer V2 (hist | edit) [2,010 bytes] Anne.Kolega (talk | contribs) (Created page with "=Introduction= QGIS is used to view the water using Non-Newtonian fluids using TUFLOW Viewer V2. The results are compared to Newtonian fluids from <u>Part 4</u>. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> =Method= Inspect water levels of the non-Newtownian outputs: <ol> <li>Open the Map Outputs results, either: *Within the QGIS Browser P...")
  • 13:3113:31, 23 June 2026 Tutorial M10 004 Results QGIS TUFLOW Viewer V2 (hist | edit) [1,469 bytes] Anne.Kolega (talk | contribs) (Created page with "=Introduction= QGIS is used to view the depth, velocity and water levels with the TUFLOW Viewer V2. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> =Method= Inspect depth, velocity and water level outputs: <ol> <li>Open the Map Outputs results, either: *Within the QGIS Browser Panel drag the following layer into the QGIS workspace, or :* '''Module_10\TUFLOW\results\M10_5m_004.xmdf''' > loads the map outp...")
  • 13:3113:31, 23 June 2026 Tutorial M10 003 Results QGIS TUFLOW Viewer V2 (hist | edit) [1,629 bytes] Anne.Kolega (talk | contribs) (Created page with "=Introduction= QGIS is used to view the depth, velocity and water levels with the TUFLOW Viewer V2. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> =Method= Inspect depth, velocity and water level outputs: <ol> <li>Open the Map Outputs and Plot Output results, either: *Within the QGIS Browser Panel drag the following layer into the QGIS workspace, or :* '''Module_10\TUFLOW\results\M10_5m_003.xmdf''' > lo...")
  • 13:2913:29, 23 June 2026 Tutorial M10 002 Results QGIS TUFLOW Viewer V2 (hist | edit) [2,035 bytes] Anne.Kolega (talk | contribs) (Created page with "=Introduction= QGIS is used to view the bathymetry and water levels with the TUFLOW Viewer V2. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> =Method= Inspect bathymetry (dynamic bed level) and water level outputs: <ol> <li>Open the Map Outputs results, either: *Within the QGIS Browser Panel drag the following layer into the QGIS workspace, or :* '''Module_10\TUFLOW\results\M10_5m_002.xmdf''' > loads the...")
  • 13:2813:28, 23 June 2026 Tutorial M10 001 Results QGIS TUFLOW Viewer V2 (hist | edit) [2,220 bytes] Anne.Kolega (talk | contribs) (Created page with "=Introduction= QGIS is used to view the dam break scenario via the bathymetry (the 'dynamic bed levels') and water depth with the TUFLOW Viewer V2. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> =Method= Inspect bathymetry (dynamic bed elevation) and water depth outputs: <ol> <li>Open the Map Outputs results, either: *Within the QGIS Browser Panel drag the following layer into the QGIS workspace, or ::*...")
  • 13:2713:27, 23 June 2026 Tutorial M09 Results QGIS TUFLOW Viewer V2 (hist | edit) [2,449 bytes] Anne.Kolega (talk | contribs) (Created page with "=Introduction= QGIS is used to load and view a range of event magnitudes and durations with the TUFLOW Viewer V2. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> = TUFLOW Project Re-Configuration = <ol> <li>Set the QGIS workspace projection to EPSG:32760, see <u> Set the Projection</u>. <li>Save the QGIS workspace by selecting Project > Save As.<b...")
  • 13:2613:26, 23 June 2026 Tutorial M08 002 Results QGIS TUFLOW Viewer V2 (hist | edit) [1,588 bytes] Anne.Kolega (talk | contribs) (Created page with "=Introduction= QGIS is used to load and view the 5m EXG and 5m DEV scenarios with the TUFLOW Viewer V2. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> =Method= Inspect the results for all scenarios: <ol> <li>Open the Map Outputs and Plot Output results, either: *Within the QGIS Browser Panel drag the following layers into the QGIS workspace, or ::* '''Module_08\TUFLOW\results\M08_5m_EXG_002.xmdf''' > loa...")
  • 13:2513:25, 23 June 2026 Tutorial M08 001 Results QGIS TUFLOW Viewer V2 (hist | edit) [1,964 bytes] Anne.Kolega (talk | contribs) (Created page with "=Introduction= QGIS is used to load and view the 10m, 5m and 2.5m scenarios with the TUFLOW Viewer V2. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> =Method= Inspect the results from each scenario: <ol> <li>Open the Map Outputs and Plot Output results, either: *Within the QGIS Browser Panel drag the following layers into the QGIS workspace, or ::* '''Module_07\TUFLOW\results\M08_10m_001.xmdf''' > loads...")
  • 13:2313:23, 23 June 2026 Tutorial M07 Results QGIS TUFLOW Viewer V2 (hist | edit) [1,205 bytes] Anne.Kolega (talk | contribs) (Created page with "=Introduction= QGIS is used to view the model results with the TUFLOW Viewer V2. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> =Method= Inspect the resolution of the outputs:<br> <ol> <li>Open the Map Outputs results, either: *Within the QGIS Browser Panel drag the following layer into the QGIS workspace, or :* '''Module_07\TUFLOW\results\M07_5m_001.xmdf''' > loads the map output mesh results * In File...")
  • 13:1413:14, 23 June 2026 Tutorial M06 003 Results QGIS TUFLOW Viewer V2 (hist | edit) [1,589 bytes] Anne.Kolega (talk | contribs) (Created page with "=Introduction= QGIS is used to view the cumulative rainfall, rainfall rate and material rainfall losses with the TUFLOW Viewer V2. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> =Method= Inspect cumulative rainfall and rainfall rate outputs: <ol> <li>Open the Plot Output results, by either: *Within the QGIS Browser Panel drag the following layers into the QGIS workspace, or ::*'''Module_06\TUFLOW\results...")
  • 13:1213:12, 23 June 2026 Tutorial M06 002 Results QGIS TUFLOW Viewer V2 (hist | edit) [2,363 bytes] Anne.Kolega (talk | contribs) (Created page with "=Introduction= QGIS is used to view the cumulative rainfall, rainfall rate and material rainfall losses with the TUFLOW Viewer V2. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> =Method= Inspect cumulative rainfall, rainfall rate and loss outputs: <ol> <li>Open the Map Outputs and Plot Output results, either: *Within the QGIS Browser Panel drag the following layers into the QGIS workspace, or ::* '''Modu...")
  • 13:0713:07, 23 June 2026 Tutorial M06 001 Results QGIS TUFLOW Viewer V2 (hist | edit) [2,678 bytes] Anne.Kolega (talk | contribs) (Created page with "=Introduction= QGIS is used to view the cumulative rainfall and rainfall rate with the TUFLOW Viewer V2. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> =Method= Inspect cumulative rainfall and rainfall rate outputs: <ol> <li>Open the Map Outputs and Plot Output results, either: *Within the QGIS Browser Panel drag the following layers into the QGIS workspace, or ::* '''Module_06\TUFLOW\results\M06_5m_001...")
  • 13:0413:04, 23 June 2026 Tutorial M05 Results QGIS TUFLOW Viewer V2 (hist | edit) [2,026 bytes] Anne.Kolega (talk | contribs) (Created page with "=Introduction= QGIS is used to view the 1D time series results with the TUFLOW Viewer V2. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> =Method= Plot Time Series results through the pipe network: <ol> <li>Open the Map Outputs and Plot Output results, either: *Within the QGIS Browser Panel drag the following layers into the QGIS workspace, or ::* '''Module_05\TUFLOW\results\M05_5m_001.xmdf''' > loads the...")
  • 13:0313:03, 23 June 2026 Tutorial M04 002 Results QGIS TUFLOW Viewer V2 (hist | edit) [2,791 bytes] Anne.Kolega (talk | contribs) (Created page with "= Introduction = QGIS is used to view the head loss across the 2D bridge with the TUFLOW Viewer V2. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> = Method = Plot head loss across the 2D bridge:<br> <ol> <li>Open the Time series results, either: *Within the QGIS Browser Panel drag the following layers into the QGIS workspace, or ::*'''Module_04\TUFLOW\results\M04_5m_002.xmdf''' > loads the map output me...")
  • 13:0013:00, 23 June 2026 Tutorial M04 Results QGIS TUFLOW Viewer V2 (hist | edit) [3,626 bytes] Anne.Kolega (talk | contribs) (Created page with "= Introduction = QGIS is used to view the head loss across the 2D bridge with the TUFLOW Viewer V2. For viewing of the 2D map results, see <u> Module 1</u>.<br> <br> = Method = Plot head loss across the 2D bridge:<br> <ol> <li>Open the Map Outputs and Plot Output results, either: *Within the QGIS Browser Panel drag the following layers into the QGIS workspace, or ::* '''Module_04\TUFLOW\results\M04_5m_001.xmdf''' > loads...")
  • 12:5812:58, 23 June 2026 Tutorial M03 Results QGIS TUFLOW Viewer V2 (hist | edit) [2,001 bytes] Anne.Kolega (talk | contribs) (Created page with "= Introduction = QGIS is used to view the 1D time series results with the TUFLOW Viewer V2. For viewing of the 2D map results, and activating TUFLOW Viewer V2, see <u> Module 1</u>. <br> <br> = Method = Plot Time Series results through the culverts: <ol> <li>Open the Map Outputs and Plot Output results, either: *Within the QGIS Browser Panel drag the following layers into the QGIS workspace, or ::* '''Module_03\TUFLOW\resu...")
  • 12:5612:56, 23 June 2026 Tutorial M01 Results QGIS TUFLOW Viewer V2 (hist | edit) [4,853 bytes] Anne.Kolega (talk | contribs) (Created page with "= Introduction = QGIS is used to view the 2D grid and mesh 2D results: :*The grid results (.tif) are inspected with the Profile Tool plugin. For installation, see <u>[https://wiki.tuflow.com/index.php?title=QGIS_Profile_Tool Installation of Profile Tool]</u> :*The mesh results (.xmdf, .tpc), including the bed elevation and time series, are inspected with the TUFLOW Viewer V2 as part of the TUFLOW Plugin. For more information on TUFLOW Viewer V2 and installation instruct...")

22 June 2026

3 June 2026

26 May 2026

  • 10:4510:45, 26 May 2026 DRAFT Direct Rainfall (Rain on Grid) Modelling Guidance (hist | edit) [15,891 bytes] Teegan.Burke (talk | contribs) (Created page with "= Direct Rainfall = Please see <u>[https://www.tuflow.com/library/webinars/#feb2021_direct_rainfall Direct Rainfall (Rain on Grid) Webinar]</u>.<br> = TUFLOW Executable = * The single precision version of TUFLOW is recommended for direct rainfall models using HPC. * The double precision version of TUFLOW is recommended for direct rainfall models using TUFLOW Classic. = Rainfall Boundary Conditions= The following links provide boundary condition guidance for applyin...")

4 May 2026

21 April 2026

Retrieved from "https://wiki.tuflow.com/Special:NewPages"