New pages

15:3615:36, 30 March 2026 TUFLOW Message 2251 (hist | edit) [836 bytes] ShuangGao (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=CHECK 2251 - HPC Infiltration Drying Depth not specified, set to Cell Wet/Dry Depth - 0.0001. |alt_msg=ERROR 2251 - HPC Infiltration Drying Depth must be smaller than Cell Wet/Dry Depth. <dry_depth>, <wet_depth> |type=CHECK ERROR |message_desc= When <tt>HPC Infiltration Drying Approach </tt> <tt>== </tt> <tt>Method C</tt> (default) the drying depth to s...")
12:3712:37, 30 March 2026 TUFLOW Message 2595 (hist | edit) [234 bytes] Emilie Nielsen (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=CHECK 2595 - FLC automatically generated for 2D BG shape. Please check _BG_UVPT check file. |alt_msg=NA |type=CHECK |message_desc= |suggestions= |uplink=2xxx Messages }}")
12:3712:37, 30 March 2026 TUFLOW Message 2596 (hist | edit) [308 bytes] Emilie Nielsen (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=CHECK 2596 - Bridge Soffit is below ground level. Ground Level = <n1>; Bridge Soffit Level = <n2>; Average depth based on wetted width at Bridge Soffit Level = <n3> |alt_msg=NA |type=CHECK |message_desc= |suggestions= |uplink=2xxx Messages }}")
10:5410:54, 30 March 2026 TUFLOW Message 5055 (hist | edit) [230 bytes] Emilie Nielsen (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=WARNING 5055 - Negative mass for tracer <tracer_name> occurred at <n> output intervals. |alt_msg=NA |type=WARNING |message_desc= |suggestions= |uplink=5xxx Messages }}")

17:1017:10, 27 March 2026 Linux Install (hist | edit) [6,393 bytes] Tor.veimo (talk | contribs) (Installation instructions for TUFLOW on Linux) originally created as "Linux Install Draft"

16:1816:18, 26 March 2026 TUFLOW Message 1470 (hist | edit) [1,157 bytes] ShuangGao (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=WARNING 1470 - Neither Gate Speed nor Period Opening/Closing is specified. Assuming Period Opening/Closing of 60 sec for XXX Control: <control_name> |alt_msg=CHECK 1470 - Both Gate Speed nor Period Opening/Closing is specified. Assuming Period Opening/Closing of 60 sec for XXX Control: <control_name> |type=ERROR |message_desc=Both <tt>Gate Speed and <tt>Period Opening/Closing comman...")

15:2915:29, 25 March 2026 TUFLOW Message 3704 (hist | edit) [353 bytes] Par (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 3704 - CATCH models require at least one groundwater layer. |alt_msg=NA |type=ERROR |message_desc=TUFLOW CATCH models require one or more groundwater layers. |suggestions=Include at least one vertical groundwater layer in the the HPC Catchment Hydraulic Model. |uplink=3xxx Messages }}")
13:5513:55, 25 March 2026 TUFLOW Message 0055 (hist | edit) [627 bytes] Par (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=WARNING 0055 - ulimit is low and this could SIGSEGV issues to occur. |alt_msg=NA |type=WARNING |message_desc=This message only occurs for TUFLOW on Linux. When running on Linux, TUFLOW checks the stack size limits. If the soft limit is less than 100MB TUFLOW will issue WARNING 0055. On Windows a stack size for the executable is set at 100MB. |suggestions=If the soft stack limit is too small, this can TUFLOW to crash with SI...")
13:1713:17, 25 March 2026 TUFLOW Message 2629 (hist | edit) [540 bytes] Par (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2629 - Counted no rainfall hyetographs. |alt_msg=NA |type=ERROR |message_desc=This error message only occurs if using a TUFLOW Rainfall Control File (.trfc). When reading rainfall hyetographs from <tt>Read GIS RF Polygons</tt> and <tt>Read GIS RF Points</tt> no hyetographs were found. |suggestions=Ensure the rainfall hyetographs have been specified with either 2d_rf point or po...")
12:0212:02, 25 March 2026 TUFLOW Message 2625 (hist | edit) [1,244 bytes] Par (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2625 - No polygons read for "RF Interpolation Method == Poly" |alt_msg=ERROR 2625 - No triangles read for "RF Interpolation Method == TIN" |type=ERROR |message_desc=These ERROR messages are issued when insufficient data is specified in the TUFLOW rainfall control file (.trfc). If using <tt>RF Interpolation Method</tt> <tt>== </tt><tt>Poly</tt>" then v...")
11:5411:54, 25 March 2026 TUFLOW Message 2624 (hist | edit) [856 bytes] Par (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=CHECK 2624 - "Maximum RF Location" command is no longer used. |alt_msg=CHECK 2624 - "Maximum Hyetograph Point" command is no longer used. |type=CHECK |message_desc=Prior to the 2026 release of TUFLOW the rainfall control file (.trfc) commands <tt>Maximum RF Location</tt> and <tt>Maximum Hyetograph Point</tt> could be used to control the memory allocated for reading and processing of...")

15:4815:48, 24 March 2026 TUFLOW Message 2627 (hist | edit) [680 bytes] Emilie Nielsen (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=WARNING 2627 - |alt_msg=NA |type=WARNING |message_desc= |suggestions= |uplink=2xxx Messages }}")
15:1615:16, 24 March 2026 TUFLOW Message 2628 (hist | edit) [817 bytes] Emilie Nielsen (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2628 - |alt_msg=NA |type=ERROR |message_desc= |suggestions= |uplink=2xxx Messages }}")
15:1615:16, 24 March 2026 TUFLOW Message 2623 (hist | edit) [749 bytes] Emilie Nielsen (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=WARNING 2623 - |alt_msg=NA |type=WARNING |message_desc= |suggestions= |uplink=2xxx Messages }}")
15:1515:15, 24 March 2026 TUFLOW Message 2626 (hist | edit) [700 bytes] Emilie Nielsen (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=CHECK 2626 - |alt_msg=NA |type=CHECK |message_desc= |suggestions= |uplink=2xxx Messages }}")
15:1315:13, 24 March 2026 TUFLOW Message 0054 (hist | edit) [654 bytes] Par (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=CHECK 0054 - ulimit not set to maximum. |alt_msg=NA |type=CHECK |message_desc=This message only occurs for TUFLOW on Linux. When running on Linux TUFLOW checks the soft and hard stack size limits. If the soft limit is less than hard limit then CHECK 0054 is issued. By default TUFLOW will attempt to raise the soft limit to the hard limit, unless the command line argument <tt>-nua</tt> is specified. |suggestions=If the soft s...")
14:5114:51, 24 March 2026 TUFLOW Message 0934 (hist | edit) [578 bytes] Par (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 0934 - Unable to load CodeMeter Runtime Library, please ensure it is installed. |alt_msg=NA |type=ERROR |message_desc=When using CodeMeter WIBU dongles, the CodeMeter Runtime needs to be installed. ERROR 0934 indictaes that TUFLOW has not been able to successfully load the CodeMeter Runtime. |suggestions=Check that the CodeMeter Runtime is installed, see Wibu_Dongles#Installation_of_CodeMeter_RunTime_Kit|Installation o...")
13:5113:51, 24 March 2026 TUFLOW Message 3056 (hist | edit) [1,157 bytes] Par (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 3056 - Unable to load CUDA libraries. Check that you have NVidia GPU driver installed |alt_msg=NA |type=ERROR |message_desc=When using GPU hardware to run simulations, the GPU driver is only loaded when required (lazy loaded). ERROR 3056 indictaes that TUFLOW has not been able to successfully load the NVidia driver. |suggestions=Check that running on Nvidia GPU hardware is desired, i.e. the computer has an NVidia GPU. <b...")

14:0314:03, 12 February 2026 TUFLOW Message 2910 (hist | edit) [730 bytes] ShuangGao (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=CHECK 2910 - First rainfall grid time: <t>. is after simulation start time of: <t> |alt_msg=CHECK 2910 - Last rainfall grid update. Rainfall grid time: <t> |type=CHECK |message_desc=Gridded rainfall does not cover the entire simulation time. In such condition, the first rainfall grid is applied since the start of the simulation, and the last rainfall grid is applied until the end of the simulation. |suggestions=Make sure gridded rai...")

16:1816:18, 6 February 2026 TUFLOW Message 1469 (hist | edit) [537 bytes] ShuangGao (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 1469 - Reporting Location not initialised in 1D domain. |alt_msg= |type=ERROR |message_desc=<tt>Read GIS Reporting Location allows for plotting of time-series results that automatically combines 1D and 2D outputs. Therefore, active 1D domain is required to initialise this feature. |suggestions=Ensure the model has a 1D domain. If it is a 2D only model, consider using PO output feature, or add a dummy...")

13:1413:14, 5 February 2026 TUFLOW Message 5135 (hist | edit) [438 bytes] Emilie Nielsen (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 5135 - Model folder path is greater than maximum character length - consider moving modelling folder closer to root. Exiting. |alt_msg=NA |type=ERROR |message_desc=The model folder path is greater than maximum character length. |suggestions=Move modelling folder closer to the root or shorten folder names. The maximum character length is 200. |uplink=5xxx Messages }}")

New pages

30 March 2026

27 March 2026

26 March 2026

25 March 2026

24 March 2026

12 February 2026

6 February 2026

5 February 2026

Navigation menu

Search