TUFLOW Message 2820

From Tuflow
Revision as of 09:10, 13 March 2026 by Emilie Nielsen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TUFLOW Message
ERROR 2820 - Unexpected Start 2D Domain / End 2D Domain commands for Quadtree simulation.

Alternate Message
ERROR 2820- Unexpected Start 2D Domain / End 2D Domain commands for HPC or Quadtree simulation. Multiple 2D Domains only available for Classic models.

Message Type
ERROR

Description
Unexpected Start 2D Domain / End 2D Domain commands for HPC or Quadtree simulation.

Suggestions
The model was likely converted from a classic model that supported multiple 2D domains. This option is not supported by the HPC or Quadtree solvers. Cell refinement is now accomplished using the superior Quadtree approach. Remove the Start 2D Domain / End 2D Domain command blocks and setup the model for Quadtree or HPC with SGS.


Up
2xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_2820&oldid=45618"