TUFLOW Message 2232

From Tuflow
Revision as of 14:44, 8 September 2016 by Mitch3007 (talk | contribs)
Jump to navigation Jump to search

TUFLOW Message
ERROR 2232 - Failed to complete triangulation. Check region perimeter does not cross or snap onto itself.

Alternate Message
NA

Message Type
ERROR

Description
TUFLOW was unable to triangulate polygon (region) object. The most likely reason for this to occur is that the region perimeter crosses or snaps onto itself. An example of a self-intersecting region is shown below with (the blue circles highlight the problem areas), click on image for a larger view.
Self Intersecting Polygon.png

Suggestions
Check region perimeter does not cross or snap onto itself. To help identify the problem, the follow steps can be used:

  • Import the sh_obj check file. This file is written sequentially and the last entry is the final abject TUFLOW was able to process. The final triangle is shown in red below:


Error 2232 01.jpg

  • This highlights that the issue is in the polygon in the 2d_zsh layer highlighted in green:

Error 2232 02.jpg

  • If the coordinates of this polygon are examined it snaps back onto itself:

307119.21 183875.86
307117.92 183878.53
307123.06 183881.09
307126.86 183872.48
307126.07 183872.04
307119.55 183872.54
307119.21 183875.86
307117.92 183878.53
307119.21 183875.86

  • To remove this (in MapInfo) the layer needs to be made editable and "cleaned" as per the images below.

Error 2232 03.jpg Error 2232 04.jpg


Up
Go-up.png 2xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_2232&oldid=10503"