TUFLOW CATCH Tutorial M01 Draft

Page Under Construction

Introduction

In this module, a TUFLOW CATCH pollutant export model is developed.

TUFLOW CATCH Tutorial Module 1 build from the model created in TUFLOW Tutorial Module 6 - Part 3. The completed TUFLOW Module 6 (part 3) is provided in the TUFLOW_CATCH_Module_01\Modelling folder of the download dataset as the starting point for this tutorial. If you are not already familiar with TUFLOW, we recommend first completing Module 1, 2, 3 and 6 of the TUFLOW Tutorials to establish an understanding of 1D and 2D TUFLOW modelling, as well as direct rainfall models.

Project Initialisation

TUFLOW CATCH models are separated into a series of folders which contain the input and output files. The recommended set up for the model directory and sub-folders is shown below. The top level folder should be called Modelling and contain three subfolders: TUFLOW', TUFLOWCatch and TUFLOWFV. more info?? For a more detailed description, refer to the TUFLOW CATCH Manual.

Folder	Sub-Folder	Description
TUFLOW	bc_dbase	Boundary condition database(s) and input time-series data.
	check	GIS and other check files to carry out quality control checks (use Write Check Files).
	model	Geometry (TGC), Boundary (TBC) and other model control text files (i.e. no GIS files).
	model\gis	GIS layers that are inputs to the 2D and 1D model domains are contained within this folder, model\gis is typically used for all QGIS and ArcGIS files.
	model\mi	GIS layers that are inputs to the 2D and 1D model domains are contained within this folder, model\mi is typically used for MapInfo formatted GIS files.
	results	TUFLOW outputs the results to this folder in specified formats.
	runs	TUFLOW Control Files (TCF).
	runs\log	TUFLOW log files (TLF) and messages layers.

Running the Simulation

Troubleshooting?