TUFLOW Message 5103
Revision as of 12:17, 1 April 2025 by Emilie Nielsen (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 5103 - Both receiving polygon == and pollutant == need to be specified in catchment hydraulic model block in the pollutant export config...")
TUFLOW Message
ERROR 5103 - Both receiving polygon == and pollutant == need to be specified in catchment hydraulic model block in the pollutant export configuration. Exiting.
Alternate Message
NA
Message Type
ERROR
Description
The TUFLOW CATCH simulation is in a pollutant export configuration, however the command "Receiving Polygon == " and/or "Pollutant == " have not been specified in the catchment hydraulic model block of the TUFLOW CATCH Control file (.tcc).
Suggestions
Both of the above commands must be specified in the catchment hydraulic model block when TUFLOW CATCH is in pollutant export configuration.
Refer to the TUFLOW CATCH Manual for more information.
| Up |
|---|
 5xxx Messages
|