TUFLOW Message 5123
Revision as of 13:37, 1 April 2025 by Emilie Nielsen (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 5123 - A catchment hydraulic model is specified but inflows have been requested to be preserved. Exiting. |alt_msg=NA |type=ERROR |m...")
TUFLOW Message
ERROR 5123 - A catchment hydraulic model is specified but inflows have been requested to be preserved. Exiting.
Alternate Message
NA
Message Type
ERROR
Description
A catchment hydraulic model has been specifed, but the in the receiving model block, the command "Preserve Catchment Inflows == ON" has been specified.
Suggestions
The "Preserve Catchment Inflows == " command is used to avoid the need to continually rerun TUFLOW HPC within TUFLOW CATCH when undertaking only a TUFLOW FV calibration. To use the "Preserve Catchment Inflows == " command, ensure no catchment hydraulic model has been specified. I.e. Catchment Hydraulic Model == None".
For mode information, refer to the TUFLOW CATCH Manual.
| Up |
|---|
 5xxx Messages
|