TUFLOW Message 5125
Revision as of 13:38, 1 April 2025 by Emilie Nielsen (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 5125 - Cannot specify material based pollutant export in HYDROLOGY configuration line. Exiting. |alt_msg=NA |type=ERROR |message_des...")
TUFLOW Message
ERROR 5125 - Cannot specify material based pollutant export in HYDROLOGY configuration line. Exiting.
Alternate Message
NA
Message Type
ERROR
Description
Material based pollutant export commands have been specified in the pollutant export model block of the TUFLOW CATCH Control file (.tcc) in a hydrology configuration. Material based pollutant export is not supported in a hydrology configuration.
Suggestions
In the pollutant export model of the .tcc, ensure all material based pollutant export commands have been commented out or removed. For example:
- Catchment Pollutant Export Model == None
- ! Material == ALL
- ! WQ_PATH_ECOLI_ALIVE_CFU_100ML, Method == Washoff1, Rate == 0.0, Limit == 0.0, Time Constant == 3600.00, Rain Threshold == 1.0, Depth Threshold == 0.20, Deposition Velocity == 0.0
- ! End Material
- ! Device == ALL
- ! SED_CLAY, Method == Eqn, Eqn == Constant, Coefficients == 1.0
- ! End Device
- ! Material == ALL
- End Catchment Pollutant Export Model
For more information, refer to the TUFLOW CATCH Manual.
| Up |
|---|
 5xxx Messages
|