TUFLOW CATCH Tutorial M03 TUFLOW HPC GIS Inputs QGIS

Page Under Construction

Introduction

The updated culvert layers are supplied and inspected.

Review Supplied TUFLOW Input Files

Navigate to the TUFLOW_CATCH_Module_03\Tutorial_Data folder. Copy the below layers into the Modelling\TUFLOW\model\gis folder:

• 2d_bc_TC03_001_P
• 2d_bc_TC03_001_L
• 1d_nwk_TC03_001_L

For this tutorial, a TUFLOW FV mesh will be included in the channel (outlined in the next section: TUFLOW FV GIS Inputs). Currently, there is a TUFLOW HPC culvert defined in the channel. This culvert needs to be removed from the TUFLOW HPC, and redefined in TUFLOW FV format.

1. Load the supplied files into QGIS and use the 'Apply TUFLOW Styles to Open Layers'.
2. Notice that the downstream culvert has been removed. All other culverts are the same.
   
   
   

Up
Back to TUFLOW CATCH Tutorial 3