TUFLOW CATCH Tutorial M03 TUFLOW HPC GIS Inputs QGIS
Revision as of 12:11, 2 June 2025 by Emilie Nielsen (talk | contribs)
Page Under Construction
Introduction
The updated culvert layers are supplied and inspected.
Review Supplied TUFLOW Input Files
Navigate to the TUFLOW_CATCH_Module_03\Tutorial_Data folder. Copy the below layers into the Modelling\TUFLOW\model\gis folder:
- 2d_bc_TC03_001_P
- 2d_bc_TC03_001_L
- 1d_nwk_TC03_001_L
For this tutorial, a TUFLOW FV mesh will be included in the channel (outlined in the next section: TUFLOW FV GIS Inputs). Currently, there is a TUFLOW HPC culvert defined in the channel. This culvert needs to be removed from the TUFLOW HPC, and redefined in TUFLOW FV format.
- Load the supplied files into QGIS and use the 'Apply TUFLOW Styles to Open Layers'.
- Notice that the downstream culvert has been removed. All other culverts are the same.
| Up |
|---|
 Back to TUFLOW CATCH Tutorial 03
|