Check Files 2d fcsh uvpt

Contains information on the cell sides (U and V points) that have a flow constriction shape object applied. This contains information on the processed elevations, blockages and form loss values applied at the cell side.

Note: This file is only created for 2d_fcsh layers, which are considered legacy and supported by TUFLOW Classic only. It is recommended to use the layered flow constriction shape (2d_lfcsh) instead. The 2d_lfcsh has a separate check file: 2d_lfcsh_uvpt.

Attributes of _fcsh_uvpt_check

Attribute Name	Attribute Description
FC_Type	The flow constriction type: Blank for general "BC" for box culverts "BD" for bridge deck "FD" for floating bridge deck For further information, refer to the TUFLOW Manual.
Z_Bed	The ground level of the z point.
Obvert_or_BC_H_or_FD_Depth	This attribute is dependent on the FC type: For a blank flow or "BD" constriction type this is the structure obvert. Above this elevation there is no additional flow area. For a "BC" constriction type this is the height of the box culvert. For a "FD" constriction type this is the depth of the object.
pBlockage	The percentage (%) blockage of below the deck level, above this the blockage is 100%.
FLC_below_Obvert	The Form Loss Coefficient below the structure obvert.
FLC_above_Obvert	The Form Loss Coefficient above the structure obvert.
BC_n_or_BD_n	For the "BC" or "BD" type constrictions this is the n attribute.
BC_Width	For a "BC" type this is the box culvert width.
Source	This is the source GIS layer which contains the flow constriction shape.

Up
TUFLOW Check Files