Difference between revisions of "Convert TUFLOW Model GIS Format"

From Tuflow
Jump to navigation Jump to search
Line 48: Line 48:
 
The tool will produce a "ready to run" model in TUFLOW most of the time. There may be situations where the user will be required to make small adjustments to the output to get the model to run. If you encounter a situation where this happens, feel free to contact [mailto:support@tuflow.com support@tuflow.com] and let us know what the issue was.<Br>
 
The tool will produce a "ready to run" model in TUFLOW most of the time. There may be situations where the user will be required to make small adjustments to the output to get the model to run. If you encounter a situation where this happens, feel free to contact [mailto:support@tuflow.com support@tuflow.com] and let us know what the issue was.<Br>
  
A known conversion issue could occur if the tool is converting both MIF and SHP files into a single format (e.g. GPKG) as the projection of these files may be interpreted slightly differently by GDAL (even though they are the same). Users may therefore be required to manually fix up the projection of the affected files, or add the TUFLOW command "<tt>GIS Projeciton Check == WARNING</tt>" to the TCF.<Br>
+
A known conversion issue could occur if the tool is converting both MIF and SHP files into a single format (e.g. GPKG) as the projection of these files may be interpreted slightly differently by GDAL (even though they are the same). Users may therefore be required to manually fix up the projection of the affected files, or add the TUFLOW command "<tt>GIS Projeciton Check == WARNING</tt>" to the TCF. '''Be careful''' to ensure they are in fact the same projection before using this command.<Br>
  
 
===Python and the Soure Code===
 
===Python and the Soure Code===

Revision as of 18:56, 11 April 2022

This tool will convert a TUFLOW model's GIS format (vector and raster layers) into a user specified, TUFLOW Supported, format. It works very similarly to the package model functionality that exists in TUFLOW and will try and package files from all scenarios/events. The difference between the package model functionality and this tool is that this tool will perform additional format conversion steps and update relevant control files to reflect these conversions.

Available since TUFLOW Plugin v3.3

Running the Tool

This tool can be found in the QGIS processing toolbox panel under 'TUFLOW'. To open the Processing Toolbox Panel, navigate to 'View' in the menubar and select Panels >> Processing Toolbox Panel.
Processing toolbox panel toggle.PNG

Convert gis format in panel.PNG

Parameters
TCF
Location of an existing TUFLOW model TCF file. This is the TCF of the model that will be converted.

Output Vector Format
Output vector format of the converted model. Supported formats are GPKG, SHP, MIF.

Output Raster Format
Output raster format of the converted model. Supported formats are GTIFF, GPKG, ASC, FLT.

Output Profile
This parameter is only used for GPKG format outputs. GPKG is a database and can store multiple layers inside one file. This option determines how the output GPKG layers will be grouped into databases.

Options:

  • SEPARATE

This option will write each GPKG layer into its own database. Where the tool encounters commands that have multiple geometry types read in on the same line (using the vertical line delimiter "|"), the layers will be combined into a single database.

  • GROUP BY CONTROL FILE 1

This option will group layers into databases defined by the control file they were specified in. In this option, TRD and TEF files are not considered separate control files.

  • GROUP BY CONTROL FILE 2

Similar to "GROUP BY CONTROL FILE 1" except will treat TRD and TEF as separate control files.

  • ALL IN ONE

Groups all layers together into one database.

Output Folder
Optional parameter specifying the output location of the converted model. By default the output location will a new folder with the same name as the input TCF located in the same folder as the input TCF.

Root Folder
By default the tool will try and find the 'root' folder containing the model files (commonly this folder is named 'TUFLOW'). The tool will try and guess the root folder based on the location of the TCF and the directory structure. If it can't find the root folder, or it picks the wrong folder then this parameter can be used to override this location within the tool.

Checking the Output

The first thing to check is the output log that is written in the dialog window. At the bottom, the log should specify whether any errors occured during conversion. If errors did occur, the tool should skip the problematic files/commands and continue with the conversion process. The tool will bail only if a more serious error occurs, for instance the tool was unable to determine the 'root' folder. Or alternatively if an unexpected error occurs then this can also cause the tool to finish early.

If errors did occur, then they should be reported in the log with more context. Users can copy the log (or save it) using the tool icons in the bottom right of the log window. Copying this text into a text editor (e.g. Notepad++) can be useful for searching for the keyword "ERROR" to track down these locations.

Checking the model
The tool will produce a "ready to run" model in TUFLOW most of the time. There may be situations where the user will be required to make small adjustments to the output to get the model to run. If you encounter a situation where this happens, feel free to contact support@tuflow.com and let us know what the issue was.

A known conversion issue could occur if the tool is converting both MIF and SHP files into a single format (e.g. GPKG) as the projection of these files may be interpreted slightly differently by GDAL (even though they are the same). Users may therefore be required to manually fix up the projection of the affected files, or add the TUFLOW command "GIS Projeciton Check == WARNING" to the TCF. Be careful to ensure they are in fact the same projection before using this command.

Python and the Soure Code

It's possible to run the tool outside of QGIS in Python. The tool uses GDAL to read and write the GIS files and does not rely on any QGIS libraries. The source code and instructions on how to run the tool in Python can be found at the following location on the TUFLOW Community GitLab page.

Up
Go-up.png Back to TUFLOW QGIS Plugin Main Page