Difference between revisions of "TUFLOW Message 0635"

From Tuflow
Jump to navigation Jump to search
Line 26: Line 26:
 
To convert a tiled GeoTIFF to a format that TUFLOW 2023-03 can read please use one of the steps below. Please ensure you don't select 'Cloud Optimised GeoTIFF' as an output as this format uses a tiled format.
 
To convert a tiled GeoTIFF to a format that TUFLOW 2023-03 can read please use one of the steps below. Please ensure you don't select 'Cloud Optimised GeoTIFF' as an output as this format uses a tiled format.
 
* Open the GeoTIFF in QGIS and export it into a new GeoTIFF (QGIS by default will use a strip structure)
 
* Open the GeoTIFF in QGIS and export it into a new GeoTIFF (QGIS by default will use a strip structure)
* Use the raster conversion tool in QGIS (via the menu "Raster >> Conversion >> Translate") - the default format will be use the strip structure
+
* Use the raster conversion tool in QGIS (via the menu "Raster >> Conversion >> Translate") - the default GeoTIFF format will be use the strip structure
 
* Use "raster_translate" GDAL tool either through the processing toolbox in QGIS or by following the instructions on the following wiki page to use GDAL directly:
 
* Use "raster_translate" GDAL tool either through the processing toolbox in QGIS or by following the instructions on the following wiki page to use GDAL directly:
 
: <u>[[Raster_Format_Conversion_Using_gdal_translate#Cloud_Optimised_GeoTIFFs | Converting from Cloud Optimised GeoTIFFs]]</u>
 
: <u>[[Raster_Format_Conversion_Using_gdal_translate#Cloud_Optimised_GeoTIFFs | Converting from Cloud Optimised GeoTIFFs]]</u>

Revision as of 17:59, 6 June 2023

TUFLOW Message
ERROR 0635 - Require at least one IFD in GeoTIFF file.

Alternate Message
ERROR 0635 - TUFLOW currently only supports LZW, PackBits, Deflate compression or no commpression in GeoTIFF. Compression type found: <>.
ERROR 0635 - Unable to determine compression type in GeoTIFF.
ERROR 0635 - TUFLOW currently only supports 1 sample per pixel in GeoTIFF. Number of samples per pixel found: <>.
ERROR 0635 - TUFLOW currently only supports horizontal difference predictors or no predictor. Predictor found: <>.
ERROR 0635 - TUFLOW currently only supports 32-bit float data in TIF. Current TIF is using: <>.
ERROR 0635 - TUFLOW does not currently support TIF tile format.
ERROR 0635 - GeoTIFF ASCII Parameter GeoKey is not type ascii.
ERROR 0635 - Unrecognised TIF format: <>.
ERROR 0635 - Unexpected issue reading TIF Header.
ERROR 0635 - Unrecognised byte order in TIF header: <>.
ERROR 0635 - Unexpected issue reading TIF Header - number of directories in IFD < 0.
ERROR 0635 - Raster Band '<>' not in TIF (maximum number of bands in TIF: <>).
ERROR 0635 - Writing TIF Header.
ERROR 0635 - Writing data to TIF.
WARNING 0635 - GeoTIFF ASCII Parameter GeoKey not found.
WARNING 0635 - GeoTIFF geokey directory not found.

Message Type
ERROR
WARNING

Description
ERROR 0635 - TUFLOW does not currently support TIF tile format.
The TIF format supports storing data in both a tiled and strip structure. The 2023-03-AA release only supports the strip structure as this is the most common and the default out of QGIS/GDAL. It is planned that the next major release after 2023-03 will support the tile structure as well.
Tif strip tile structure.PNG
To convert a tiled GeoTIFF to a format that TUFLOW 2023-03 can read please use one of the steps below. Please ensure you don't select 'Cloud Optimised GeoTIFF' as an output as this format uses a tiled format.

  • Open the GeoTIFF in QGIS and export it into a new GeoTIFF (QGIS by default will use a strip structure)
  • Use the raster conversion tool in QGIS (via the menu "Raster >> Conversion >> Translate") - the default GeoTIFF format will be use the strip structure
  • Use "raster_translate" GDAL tool either through the processing toolbox in QGIS or by following the instructions on the following wiki page to use GDAL directly:
Converting from Cloud Optimised GeoTIFFs

Suggestions
Please contact support@tuflow.com.


Up
Go-up.png 0xxx Messages