Difference between revisions of "TUFLOW Message 1286"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
|||
| Line 5: | Line 5: | ||
|message_desc= Flow from 1D QT region can't be applied to a H boundary or a 2D SX link. | |message_desc= Flow from 1D QT region can't be applied to a H boundary or a 2D SX link. | ||
|suggestions=Correct the application of 1D QT region. This Error can also occur when a specific flag (C, O or P) is applied to an incorrect 1D node. For example, if a "P" flag for direct flow into the bottom of pits channels is applied to a 1D QT region containing only open channel nodes. | |suggestions=Correct the application of 1D QT region. This Error can also occur when a specific flag (C, O or P) is applied to an incorrect 1D node. For example, if a "P" flag for direct flow into the bottom of pits channels is applied to a 1D QT region containing only open channel nodes. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_1285|Message 1285]] | |prelink=[[TUFLOW_Message_1285|Message 1285]] | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_1287|Message 1287]] | |nextlink=[[TUFLOW_Message_1287|Message 1287]] | ||
}} | }} | ||
Revision as of 14:44, 5 July 2022
TUFLOW Message
ERROR 1286 - All 1D nodes within 1D QT region to be assigned a flow are a H boundary or a 2D SX link.
Alternate Message
NA
Message Type
ERROR
Description
Flow from 1D QT region can't be applied to a H boundary or a 2D SX link.
Suggestions
Correct the application of 1D QT region. This Error can also occur when a specific flag (C, O or P) is applied to an incorrect 1D node. For example, if a "P" flag for direct flow into the bottom of pits channels is applied to a 1D QT region containing only open channel nodes.
| Up |
|---|
 1xxx Messages
|