TUFLOW Message 1286
Revision as of 10:21, 23 December 2022 by Melissa1987 (talk | contribs)
TUFLOW Message
ERROR 1286 - All 1D nodes within 1D QT region to be assigned a flow are a H boundary or a 2D SX link.
Alternate Message
NA
Message Type
ERROR
Description
Flow from 1D QT region can't be applied to a H boundary or a 2D SX link.
Suggestions
Correct the application of 1D QT region. This Error can also occur when a specific flag (C, O or P) is applied to an incorrect 1D node. For example, if a "P" flag for direct flow into the bottom of pits channels is applied to a 1D QT region containing only open channel nodes.
| Up |
|---|
 1xxx Messages
|