Difference between revisions of "TUFLOW Message 1317"

From Tuflow
Jump to navigation Jump to search
Line 6: Line 6:
 
|suggestions=Ensure WLL snaps to 1D network channel object or cross channel (only if using 2 vertices WLL).
 
|suggestions=Ensure WLL snaps to 1D network channel object or cross channel (only if using 2 vertices WLL).
  
|prelink=[[TUFLOW_Message_1316|Message 1316]]
 
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1318|Message 1318]]
 
 
}}
 
}}

Revision as of 10:30, 23 December 2022

TUFLOW Message
WARNING 1317 - WLL does not cross (2 point WLL only) or snap to 1D channel

Alternate Message
NA

Message Type
WARNING

Description
Water Level Line (WLL) is being ignored as it doesn't cross a 1D network channel (only valid for WLL with 2 vertices) or snap to a vertex on the 1D network as required for a WLL with three or more vertices.

Suggestions
Ensure WLL snaps to 1D network channel object or cross channel (only if using 2 vertices WLL).


Up
Go-up.png 1xxx Messages