Difference between revisions of "TUFLOW Message 2024"

From Tuflow
Jump to navigation Jump to search
Line 12: Line 12:
 
[[File:Error 2024 fix.PNG|500px]]
 
[[File:Error 2024 fix.PNG|500px]]
  
|prelink=[[TUFLOW_Message_2023|Message 2023]]
+
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2025|Message 2025]]
 
 
}}
 
}}

Revision as of 10:58, 23 December 2022

TUFLOW Message
ERROR 2024 - Could not find a 1D node snapped to CN line.

Alternate Message
NA

Message Type
ERROR

Description
Could not find a 1D node snapped to 2d_bc connection (CN) line.

Suggestions
Check snapping and location of 2d_bc "CN" type object. This should connect a 1D node to a 2D boundary condition, e.g. "HX" or "SX" type connection. The messages.mif or messages_P.shp file will contain the location of the error.
Check that the "CN" line finishes at a 1D node. In the example below, a single line has been digitised from the HX line to the HX line. Whilst it is snapped to the 1D node, it does not terminate there and therefore will cause Error 2024 to be generated.
Note that the direction the "CN" line is digitised is not important.
Error 2024.PNG

In the next image, this line has been split at the 1D node and the issue is resolved.
Error 2024 fix.PNG


Up
Go-up.png 2xxx Messages