Difference between revisions of "TUFLOW Message 2212"

From Tuflow
Jump to navigation Jump to search
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=2D SA PIT option (.tbc command: <font color="green"><tt>Read GIS SA PITS == <2d_sa layer></tt></font>) directs the inflow only to 2D cells that are connected to a 1D pit or node connected to the 2D domain using '''SX''' for the Conn_2D 1d_nwk attribute.  The inflow is spread equally over the applicable 2D cells.  Within this polygon no SX type cells connected to pits are found.
+
|message_desc=2D SA PIT option (.tbc command: <font color="blue"><tt>Read GIS SA PITS </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt><2d_sa layer></tt></font>) directs the inflow only to 2D cells that are connected to a 1D pit or node connected to the 2D domain using '''SX''' for the Conn_2D 1d_nwk attribute.  The inflow is spread equally over the applicable 2D cells.  Within this polygon no SX type cells connected to pits are found.
|suggestions=Check location of 2d_sa objects and pits, ensure pit objects have '''SX''' connection to the 2D model domain. Use <font color="green"><tt>Read GIS SA == <2d_sa layer></tt></font> instead of <font color="green"><tt>Read GIS SA PITS == <2d_sa layer></tt></font> for polygons with no pits.
+
|suggestions=Check location of 2d_sa objects and pits, ensure pit objects have '''SX''' connection to the 2D model domain. Use <font color="blue"><tt>Read GIS SA </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt><2d_sa layer></tt></font> instead of <font color="blue"><tt>Read GIS SA PITS </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt><2d_sa layer></tt></font> for polygons with no pits.
 
|discussion_page=* [[Talk:TUFLOW Message 2212|Discuss Message 2212]]
 
|discussion_page=* [[Talk:TUFLOW Message 2212|Discuss Message 2212]]
 
|link3=''
 
|link3=''

Revision as of 10:42, 27 June 2022

TUFLOW Message
ERROR 2212 - No 2D SX pit cells within SA PIT inflow polygon.

Alternate Message
NA

Message Type
ERROR

Description
2D SA PIT option (.tbc command: Read GIS SA PITS == <2d_sa layer>) directs the inflow only to 2D cells that are connected to a 1D pit or node connected to the 2D domain using SX for the Conn_2D 1d_nwk attribute. The inflow is spread equally over the applicable 2D cells. Within this polygon no SX type cells connected to pits are found.

Suggestions
Check location of 2d_sa objects and pits, ensure pit objects have SX connection to the 2D model domain. Use Read GIS SA == <2d_sa layer> instead of Read GIS SA PITS == <2d_sa layer> for polygons with no pits.


Up
Go-up.png 2xxx Messages