Difference between revisions of "TUFLOW Message 2231"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[CHECK]] | |type=[[CHECK]] | ||
| − | |message_desc=When using <font color=" | + | |message_desc=When using <font color="blue"><tt>Read GIS Z HX Line</tt></font> points with type '''ZP''' are snapped along the '''HX''' line to set the elevation of the 2D cells along 1D/2D connection. For the '''ZP''' points the 2d_bc “f” attribute is used to set the elevation and the “d” attribute is used to adjust the elevation. This message informs the user that a '''HX''' line has been found without any attached '''ZP''' points. This line is not modifying any cell elevations. |
|suggestions=Check '''HX''' line to see if a breakline is intended. | |suggestions=Check '''HX''' line to see if a breakline is intended. | ||
| − | + | ||
| − | |||
| − | |||
| − | |||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 14:15, 7 February 2023
TUFLOW Message
CHECK 2231 - No ZP points snapped to HX line. HX line not used to modify Zpts.
Alternate Message
NA
Message Type
CHECK
Description
When using Read GIS Z HX Line points with type ZP are snapped along the HX line to set the elevation of the 2D cells along 1D/2D connection. For the ZP points the 2d_bc “f” attribute is used to set the elevation and the “d” attribute is used to adjust the elevation. This message informs the user that a HX line has been found without any attached ZP points. This line is not modifying any cell elevations.
Suggestions
Check HX line to see if a breakline is intended.
| Up |
|---|
 2xxx Messages
|