Difference between revisions of "TUFLOW Message 2231"

From Tuflow
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 5: Line 5:
 
|message_desc=When using <font color="blue"><tt>Read GIS Z HX Line</tt></font> points with type '''ZP''' are snapped along the '''HX''' line to set the elevation of the 2D cells along 1D/2D connection.  For the '''ZP''' points the 2d_bc “f” attribute is used to set the elevation and the “d” attribute is used to adjust the elevation.  This message informs the user that a '''HX''' line has been found without any attached '''ZP''' points.  This line is not modifying any cell elevations.
 
|message_desc=When using <font color="blue"><tt>Read GIS Z HX Line</tt></font> points with type '''ZP''' are snapped along the '''HX''' line to set the elevation of the 2D cells along 1D/2D connection.  For the '''ZP''' points the 2d_bc “f” attribute is used to set the elevation and the “d” attribute is used to adjust the elevation.  This message informs the user that a '''HX''' line has been found without any attached '''ZP''' points.  This line is not modifying any cell elevations.
 
|suggestions=Check '''HX''' line to see if a breakline is intended.
 
|suggestions=Check '''HX''' line to see if a breakline is intended.
|discussion_page=* [[Talk:TUFLOW Message 2231|Discuss Message 2231]]
+
 
|link3=''
 
|link4=''
 
|prelink=[[TUFLOW_Message_2230|Message 2230]]
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2232|Message 2232]]
 
 
}}
 
}}

Latest revision as of 14:15, 7 February 2023

TUFLOW Message
CHECK 2231 - No ZP points snapped to HX line. HX line not used to modify Zpts.

Alternate Message
NA

Message Type
CHECK

Description
When using Read GIS Z HX Line points with type ZP are snapped along the HX line to set the elevation of the 2D cells along 1D/2D connection. For the ZP points the 2d_bc “f” attribute is used to set the elevation and the “d” attribute is used to adjust the elevation. This message informs the user that a HX line has been found without any attached ZP points. This line is not modifying any cell elevations.

Suggestions
Check HX line to see if a breakline is intended.


Up
Go-up.png 2xxx Messages