Difference between revisions of "TUFLOW Message 2232"

From Tuflow
Jump to navigation Jump to search
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
 +
 
|tuflow_message=ERROR 2232 - Failed to complete triangulation.  Check region perimeter does not cross or snap onto itself.
 
|tuflow_message=ERROR 2232 - Failed to complete triangulation.  Check region perimeter does not cross or snap onto itself.
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
 
|message_desc=TUFLOW was unable to triangulate polygon (region) object. The most likely reason for this to occur is that the region perimeter crosses or snaps onto itself.  An example of a self intersecting region is shown below with (the blue circles highlight the problem areas), click on image for a larger view.<br>
 
|message_desc=TUFLOW was unable to triangulate polygon (region) object. The most likely reason for this to occur is that the region perimeter crosses or snaps onto itself.  An example of a self intersecting region is shown below with (the blue circles highlight the problem areas), click on image for a larger view.<br>
 
 
[[File:Self Intersecting Polygon.png|500px]]
 
[[File:Self Intersecting Polygon.png|500px]]
 +
|suggestions=Check region perimeter does not cross or snap onto itself.  To help identify the problem, the follow steps can be used:<br>
 +
* Import the sh_obj check file.  This file is written sequentially and the last entry is the final abject TUFLOW was able to process.  The final triangle is shown in red below:<br>
 +
<br>
 +
[[File:Error 2232 01.jpg|600px]]
 +
<br><br>
 +
* This highlights that the issue is in the polygon in the 2d_zsh layer highlighted in green: <br>
 +
[[File:Error 2232 02.jpg]]
 +
<br><br>
 +
* If the coordinates of this polygon are examined it snaps back onto itself:<br>
 +
<tt>
 +
307119.21 183875.86<br>
 +
<u>'''307117.92 183878.53'''</u><br>
 +
307123.06 183881.09<br>
 +
307126.86 183872.48<br>
 +
307126.07 183872.04<br>
 +
307119.55 183872.54<br>
 +
307119.21 183875.86<br>
 +
<u>'''307117.92 183878.53'''</u><br>
 +
307119.21 183875.86<br>
 +
* To remove this (in MapInfo) the layer needs to be made editable and "cleaned" as per the images below.<br>
 +
[[File:Error 2232 03.jpg]]
 +
[[File:Error 2232 04.jpg]]
  
|suggestions=Check region perimeter does not cross or snap onto itself.
 
 
|discussion_page=* [[Talk:TUFLOW Message 2232|Discuss Message 2232]]
 
|discussion_page=* [[Talk:TUFLOW Message 2232|Discuss Message 2232]]
 
|link3=''
 
|link3=''

Revision as of 20:18, 18 June 2015

TUFLOW Message
ERROR 2232 - Failed to complete triangulation. Check region perimeter does not cross or snap onto itself.

Alternate Message
NA

Message Type
ERROR

Description
TUFLOW was unable to triangulate polygon (region) object. The most likely reason for this to occur is that the region perimeter crosses or snaps onto itself. An example of a self intersecting region is shown below with (the blue circles highlight the problem areas), click on image for a larger view.
Self Intersecting Polygon.png

Suggestions
Check region perimeter does not cross or snap onto itself. To help identify the problem, the follow steps can be used:

  • Import the sh_obj check file. This file is written sequentially and the last entry is the final abject TUFLOW was able to process. The final triangle is shown in red below:


Error 2232 01.jpg

  • This highlights that the issue is in the polygon in the 2d_zsh layer highlighted in green:

Error 2232 02.jpg

  • If the coordinates of this polygon are examined it snaps back onto itself:

307119.21 183875.86
307117.92 183878.53
307123.06 183881.09
307126.86 183872.48
307126.07 183872.04
307119.55 183872.54
307119.21 183875.86
307117.92 183878.53
307119.21 183875.86

  • To remove this (in MapInfo) the layer needs to be made editable and "cleaned" as per the images below.

Error 2232 03.jpg Error 2232 04.jpg


Up
Go-up.png 2xxx Messages