Difference between revisions of "TUFLOW Message 2429"

From Tuflow
Jump to navigation Jump to search
 
Line 8: Line 8:
 
This error could also spuriously occur when writing .xmdf output for a TUFLOW AD (advection dispersion) simulation with the 2013 version of TUFLOW.  This has been fixed for the 2016 version of TUFLOW.
 
This error could also spuriously occur when writing .xmdf output for a TUFLOW AD (advection dispersion) simulation with the 2013 version of TUFLOW.  This has been fixed for the 2016 version of TUFLOW.
  
|prelink=[[TUFLOW_Message_2428|Message 2428]]
+
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2430|Message 2430]]
+
 
 
}}
 
}}

Latest revision as of 08:49, 3 March 2023

TUFLOW Message
ERROR 2429 - Could not write XMDF scalar data. Check disk space.

Alternate Message
ERROR 2429 - Could not write XMDF wet/dry flags. Check disk space.

Message Type
ERROR

Description
TUFLOW was unable to write data to the output .xmdf file. The most likely cause for this is that there is insufficient disk space.

Suggestions
Check that the output drive has space available.
Check that the file system in use support the file size. For example, FAT32 file system has a maximum file size limit of 4GB, NTFS file system can exceed 4GB.
This error could also spuriously occur when writing .xmdf output for a TUFLOW AD (advection dispersion) simulation with the 2013 version of TUFLOW. This has been fixed for the 2016 version of TUFLOW.


Up
Go-up.png 2xxx Messages